
When routing piping systems in marine vessels or high-pressure offshore environments, engineers face a constant dilemma: hard aluminum tubes crack during bending, while soft aluminum tubes fail to withstand internal pressure and saltwater corrosion.
The 5086 H111 aluminum tube is the exact material designed to solve this problem. As a premium aluminum-magnesium alloy, the 5086-H111 temper provides a rare balance of medium strength, outstanding ductility for rotary bending, and top-tier resistance to seawater.
At GNEE, we manufacture and supply industrial-grade 5086 H111 aluminum pipes for shipyards, pressure vessel fabricators, and heavy transportation industries globally. Whether you need seamless tubing for fluid transport or extruded pipes for structural frames, we deliver certified quality direct from our factory.
What is 5086 H111 Aluminum Tubing?
To understand this pipe, you must understand its temper. "5086" is the base aluminum-magnesium alloy known for high corrosion resistance.
The "H111" temper indicates that the aluminum tube has undergone slight strain hardening (cold working) followed by a stress-relief process.
Unlike fully annealed (O temper) tubes, which are too soft, or highly hardened (H32/H116) tubes, which are difficult to bend, H111 is the "goldilocks" temper. It retains the ductility of the 5086 alloy while slightly increasing its yield strength.
This makes the 5086 H111 aluminum pipe the ultimate "easy-to-fabricate" marine material. It can be bent into complex pipeline shapes, welded heavily, and installed without post-weld heat treatments.

Chemical Composition of 5086 H111 Extruded Aluminum Pipe
The secret to its marine performance lies in the magnesium content (3.5% - 4.5%), which creates a self-healing oxide layer against salt spray.
| Element | Content Percentage (%) |
| Magnesium (Mg) | 3.5 – 4.5 |
| Manganese (Mn) | 0.20 – 0.70 |
| Chromium (Cr) | 0.05 – 0.25 |
| Silicon (Si) | Max 0.40 |
| Iron (Fe) | Max 0.50 |
| Zinc (Zn) | Max 0.25 |
| Titanium (Ti) | Max 0.15 |
| Copper (Cu) | Max 0.10 |
| Aluminum (Al) | Balance |
| (Note: Copper is strictly limited to ≤0.1%,effectively eliminating the risk of Stress Corrosion Cracking commonly found in 2000-series aluminum.) | |
Mechanical Properties of 5086 H111 Marine Aluminum Pipe
The high elongation rate is what makes this tube so easy to process without fracturing.
| Property | Standard Value (H111 Temper) |
| Tensile Strength | 240 – 310 MPa |
| Yield Strength | Min 100 MPa |
| Elongation | 11% – 17% |
| Hardness (Brinell) | ~ 65 HB |
Key Advantages of 5086 H111 Seamless Aluminum Tubing
- Exceptional Bending Capability: Because of its 11-17% elongation, a 5086 H111 pipe can be bent using CNC rotary draw benders with minimal risk of wrinkling or cracking. This is critical for routing fuel and hydraulic lines in tight ship engine rooms.
- Superior Weldability: It supports MIG and TIG welding effortlessly. More importantly, because it is not a heavily heat-treated alloy, the weld joints maintain high structural integrity without needing post-weld heat treatment.
- Absolute Marine Corrosion Resistance: Bare 5086 H111 aluminum pipes can be exposed to seawater, salt fog, and humid industrial atmospheres for decades without rusting or pitting.
- Lightweight: It reduces the dead weight of ships and transportation vehicles, leading to higher fuel efficiency and increased payload capacity.
Comparing 5086 H111 Aluminum Tube to Other Tempers
Choosing the right temper prevents costly manufacturing errors:
- 5086 H111 vs. 5086 H32 / H116 Tube: H32 and H116 are significantly harder and stronger. However, if your factory tries to tightly bend a thick-walled H32 pipe, it will likely crack. Choose H111 if your pipe requires bending, flaring, or complex shaping.
- 5086 H111 vs. 5086 O Temper Tube: The "O" temper is fully annealed (maximum softness). While it is the easiest to bend, its yield strength is too low for most pressurized systems. H111 provides the necessary structural rigidity while remaining workable.

Core Applications of 5086 H111 Alloy Pipe
Because of its unique properties, this pipe is widely consumed in heavy-duty sectors:
1. Shipbuilding and Offshore Engineering
High-pressure seawater cooling pipelines.
Ship engine fuel lines and hydraulic routing systems.
Welded structural handrails and scaffolding on offshore oil rigs.
2. Pressure Vessels and Fluid Transport
Piping for chemical storage tanks (suitable for non-strongly corrosive liquids).
Cryogenic pipelines and LPG cylinder routing. (5086 actually gains strength at sub-zero temperatures without becoming brittle).
3. Commercial Transportation
Fluid transfer tubes in heavy-duty trucks and C82 coal cars.
Pneumatic lines for braking systems in trains and RVs.

Fabrication and Welding Guide for 5086 H111 Tubing
To ensure your fabrication team gets the best results from our materials, please follow these guidelines:
- Welding Wire Selection: Never use pure aluminum wire. Always use ER5183 or ER5356 filler wire, which matches the magnesium content of the 5086 pipe, ensuring strong and corrosion-resistant weld seams.
- Pre-heating: For thick-walled 5086 H111 pipes (wall thickness >6mm), a slight pre-heating (100°C - 150°C) is recommended to prevent thermal shock and weld cracking.
- Temperature Warning: Do not use this pipe in environments exceeding 120°C (250°F). Long-term exposure to high heat causes magnesium precipitation, which leads to a severe loss of strength and an increased risk of stress corrosion cracking. It is not suitable for high-temperature exhaust pipes.
GNEE 5086 H111 Aluminum Tube Supply Capabilities
At GNEE, we don't just supply metal; we supply reliability. We produce both Extruded 5086 H111 Tubes for structural framing and Seamless 5086 H111 Pipes (extruded over a mandrel) for high-pressure fluid systems.
- Standards: Complying with ASTM B241, ASTM B210, and ASME SB241.
Get a Quick Quote for 5086 H111 Aluminum Pipe
Stop guessing if your material will survive the ocean. Partner with GNEE to get certified, highly formable marine pipes.
Send us your inquiry today and receive:
- A highly competitive, factory-direct price quote within 24 hours.
- A Free EN 10204 3.1 Mill Test Certificate (MTC) sample for your engineering team to review.
- Free technical consultation on welding and bending limits for your specific pipe dimensions.


Contact us now with your required OD, Wall Thickness, and Quantity to secure your stock
