Things To Note When Choosing Aluminum Alloy Welding Wire

Feb 05, 2024

Leave a message

 

Crack susceptibility of welded joints. The direct factor affecting crack sensitivity is the matching of the base metal and the welding wire. Choosing a weld metal with a lower melting temperature than the base metal can reduce the crack sensitivity of the weld metal and heat-affected zone. For example, when welding 6061 alloy with a silicon content of 0.6%, the crack sensitivity is very high if the same alloy is used as the weld.

However, when using ER4043 welding wire with a silicon content of 5%, its melting temperature is lower than that of the 6061 alloy and it has higher plasticity during the cooling process, so it has good crack resistance. In addition, the weld metal should avoid the combination of magnesium and copper because Al-Mg-Cu has a high crack sensitivity.
Mechanical properties of welded joints. Industrial pure aluminum has the lowest strength, 4000 series aluminum alloys are in the middle, and 5000 series aluminum alloys have the highest strength. Although aluminum-silicon welding wire has high crack resistance, silicon-containing welding wire has poor plasticity, so for joints that require plastic deformation after welding, silicon-containing welding wire should be avoided.

HHF Aluminum Foil Jumbo RollHHF Large Rolls Of Aluminium FoilHHF Large Rolls Of Aluminium Foil