1 Before welding aluminum alloy, the surface of the aluminum alloy must be cleaned first. There should be no oil, dust, etc. You can use acetone to clean the surface of the aluminum alloy welding joint. For thick plate aluminum alloy, use a wire brush to clean it, and then add acetone to clean it.
2. When welding aluminum alloy, the surface of the aluminum alloy must be cleaned first. There should be no oil smoke, dust, etc. In addition, thick plate aluminum alloy should be cleaned with a wire brush, and then cleaned with acetone.

3. If the plates can be preheated after comparison, this can prevent insufficient preheating from causing incomplete welding. When closing the arc, use a small current to close the arc and fill the pits.
4. Welding must be standardized and welded according to the thickness of the plate.
5. The cable of the welding gun should not be too long. If it is too long, the wire feeding will be unstable.
