Common Parameters Of Surface Treatment Process

Feb 05, 2024

Leave a message

 


The process of cleaning and roughening metal surfaces using the impact of high-speed sand flow. This method of surface treatment of aluminum parts can achieve a certain degree of cleanliness and different roughness on the surface of the workpiece, improving the mechanical properties of the surface of the workpiece, thus improving the fatigue resistance of the workpiece and increasing the distance between it and the coating. The adhesion extends the durability of the paint film and is also beneficial to the leveling and decoration of the paint.


It is a manufacturing process in which lines are repeatedly scraped out of aluminum plates using sandpaper. Wire drawing can be divided into straight wire drawing, random wire drawing, spiral wire drawing and threaded wire drawing. The metal wire drawing process can clearly show every tiny trace, so that the matte metal shines with fine hair luster. The product has both fashion and technology.

It refers to the electrochemical oxidation of metals or alloys. Aluminum and its alloys form an oxide film on aluminum products (anode) under the action of external current under the corresponding electrolyte and specific process conditions. Anodizing can not only solve defects in aluminum surface hardness, wear resistance, etc., but also extend the service life of aluminum and enhance its aesthetics. It has become an indispensable part of aluminum surface treatment and is currently the most widely used and very successful. Craftsmanship.

 

 

Common parameters of surface treatment processCommon parameters of surface treatment processCommon parameters of surface treatment process