The 5M52 aluminum alloy sheet and foil products produced by G have been fully applied in many industries such as bus doors, skins, engines, luggage compartment outer panels, patterned panels, aluminum alloy lamp ports, aluminum alloy shutters, can bodies, can lids, aluminum foil lunch boxes, and so on.GNE's 5M52 aluminum alloy sheet and foil products have been comprehensively used in many industries such as bus doors, skins, engines, luggage compartment outer panels, patterned panels, aluminum alloy lamp ports, aluminum alloy shutters, cans, can lids, aluminum foil lunch boxes, and so on.
5052/5M52 composition comparison results analysis:
5M52 aluminum alloy chemical composition of its lower part of the Mg content, add part of the Mn element so that the material strength, recrystallization temperature, alloy density has been improved, due to the density of a slight increase in corrosion resistance will be more prominent than the 5052 alloy effect;
5052/5M52 cold rolled mechanical properties comparison results analysis:
Through the above comparison, 5052, 5M52 in the same thickness under the tensile strength, yield strength of the relative deviation is not large, 5M52 elongation, hardness than 5052 slightly lower. The tested values are all within the range of the national standard.
5052/5M52 material metallographic organization comparison results analysis:
It is found that the grain size of 5M52 alloy is finer than that of 5052, which is due to the addition of a part of the Mn element grain density increases slightly, and a certain content of Mn element has an effect on the grain refinement. The denser grain makes the material stamping performance effectively improved.
5052/5M52 anodizing effect comparison results analysis:
After the two alloys are anodized in the original color, the color and film thickness are uniform, and the anodized surface is beautiful, and the use of 5M52 as the anodized material also achieves the advantages of beauty, corrosion resistance and durability;
5052/5M52 bending and stamping effect comparison results analysis:
Through the 5052, 5M5H32 state, 1.5mm thickness 90O bending comparison, the two alloy materials bending surface fine, smooth, no cracking, orange peel and other defects.GNEE's 5M52 cans cans, cans, lamps and other materials after the stamping of the surface smooth, fine, completely and imported materials;
Summary Analysis:
Bending/Stamping/Forming 5M52 Aluminum Alloy Superior to 5052 Aluminum Alloy
Surface quality/organization quality 5M52 aluminum alloy reaches the standard of 5052 aluminum alloy.
Conclusion:
5M52 aluminum alloy can completely replace 5052 aluminum alloy.
Reason:
A: 5M52 aluminum alloy can completely replace 5052 aluminum alloy to meet the customer's high-end use of the material.
Second: 5M52 aluminum alloy's unique high efficiency and low cost bring customers a certain competitive advantage.