Aluminum Foil Production Speed Effect

Jan 04, 2024

Leave a message

 

During the rolling process of aluminum foil, the phenomenon that the thickness of the foil becomes thinner with the increase of the rolling degree is called the speed effect. The explanation of the speed effect mechanism still needs in-depth research. The reasons for the speed effect are generally believed to have the following three aspects:

 

1235 Large rolls of aluminium foil
1) The friction state between the work roll and the rolling material changes. As the rolling speed increases, the amount of lubricating oil brought in increases, thus causing the lubrication state between the roll and the rolling material to change. The friction coefficient decreases, the oil film becomes thicker, and the thickness of the aluminum foil becomes thinner.
2) Changes in the rolling mill itself. In a rolling mill using cylindrical bearings, as the rolling speed increases, the roll neck will float in the bearing, so that the two interacting loaded rolls will move closer to each other.

3003 aluminium foil Large rolls


3) Processing softening when the material is deformed by rolling. The rolling speed of the high-speed aluminum foil rolling mill is very high. As the rolling speed increases, the temperature of the rolling deformation zone increases. According to calculations, the metal temperature in the deformation zone can rise to 200°C, which is equivalent to an intermediate recovery annealing, thus causing Process softening phenomenon of rolled materials.