5083 H116 5083 H111 Plate Price In November 2026

Nov 19, 2026

Leave a message

If you are pricing a hull skin, a deck house, a tank shell or a batch of flange blanks in marine-grade plate, the number you need is 5083-H116 or 5083-H111 aluminum plate per ton. Through November the SMM aluminum base slid while the conversion premium for plate held steady, so most of the month's saving came from the metal, not from the mill.

 

On November 18 the SMM A00 aluminum base settled at 22,540 CNY/t (≈ 3,379 USD/t), down 980 CNY/t (-4.2%) from 23,520 CNY/t on November 2 and the lowest close of the month. Plate listings followed the base down; the premium for rolling, stabilising and certifying 5xxx plate stayed in the same band it held all autumn.

 

For a firm 5083-H116 or H111 aluminum plate price, send the temper, thickness, width, length and quantity.

Ask for a quote with your plate list and the metal element is fixed against the SMM quote on the order date.

5083 aluminum plate price list for November (CNY and USD per ton)

Alloy and temper Size (mm) Price (CNY/t) Price (USD/t)
5083-H116 plate 5 × 2000 × 6000 30,300 4,543
5083-H116 plate 12 × 2000 × 8000 29,870 4,478
5083-H116 plate 20 × 2000 × 8000 29,470 4,418
5083-H116 plate 35 × 2000 × 6000 30,700 4,603
5083-H111 plate 145 × 1220 × 2285 33,245 4,984
5083 plate, general market average, mid-November 27,970 – 28,070 4,193 – 4,208

The spread between H116 listings and the general 5083 market average is the conversion premium: rolling to thickness, the stabilising treatment for seawater service, straightening, and the mill certificate. Thicker and wider plate costs more per ton because fewer pieces come out of a heat and the rolling schedule takes longer.

 

Conversion note: USD figures use USD/CNY 6.67 on November 19, 2026 and are rounded to the nearest dollar. They are given for comparison only - a contract in USD is converted at the exchange rate on the contract date, so the settled amount can differ from the figures shown here. RMB figures include 13% VAT; the VAT-excluded equivalent is roughly the RMB figure divided by 1.13. Freight, inspection beyond the mill certificate and the trade term are additional.

 

SMM A00 aluminum base in November and the month-end drop

The chart plots the SMM A00 aluminum base for every trading day from November 2 to November 18. The month opened near 23,500 CNY/t, peaked at 23,545 CNY/t on November 9, then fell 600 CNY/t in a single session on November 11. A partial rebound on November 12 was given back in the second half of the month, and the base closed at its low of 22,540 CNY/t on November 18.

 

SMM A00 aluminum base · November 2026 (CNY/t)
SMM A00 aluminum base · November 2026 (CNY/t)

 

Date SMM A00 (CNY/t) SMM A00 (USD/t) Day change (CNY/t)
Nov 2 23,520 3,526 -260
Nov 3 23,450 3,516 -70
Nov 4 23,350 3,501 -100
Nov 5 23,380 3,505 +30
Nov 6 23,340 3,499 -40
Nov 9 23,540 3,529 +200
Nov 10 23,290 3,492 -250
Nov 11 22,690 3,402 -600
Nov 12 23,120 3,466 +430
Nov 13 23,130 3,468 +10
Nov 16 22,960 3,442 -170
Nov 17 22,870 3,429 -90
Nov 18 22,540 3,379 -330

Two things matter for a plate buyer in this line. First, the month high and low were 1,000 CNY/t apart, so the date you fix the metal changes the invoice more than a small change in gauge. Second, single sessions moved as much as 600 CNY/t; a quotation held over several days needs the order date written on it.

 

How the 5083 aluminum plate premium behaved through November

The general 5083 plate market average was 28,070 CNY/t on November 13 and 27,970 CNY/t on November 16, a fall of 100 CNY/t. Over the same two sessions the SMM base dropped 170 CNY/t. Plate came down less than metal, which widened the rolling and certification premium slightly.

 

H116 listings stayed in a 29,470–30,700 CNY/t band across the month. H116 carries a stabilizing treatment for seawater exposure and a guaranteed exfoliation-corrosion result, so its premium sits above general 5083 plate and above H111, which is only lightly work hardened and is chosen where deep forming matters more than a seawater rating.

 

Specification of 5083-H116 and H111 aluminum plate

Parameter Options
Alloy and temper 5083 in H116, H321, H111, H112 and O
Standard ASTM B209, EN 485-2; composition per EN 573-3 and GB/T 3880
Thickness 0.3 – 200 mm
Width 100 – 2500 mm; common widths 1220 / 1250 / 1500 / 2000 / 2200 / 2500 mm
Length Up to 6000 mm, or cut to size
Surface Mill finish, bright, polished surface; with blue PVC film or paper interleaved
HS code 7606.12 for rectangular alloy plate; final classification at destination customs

The size range is indicative.

Confirm the exact thickness, width and temper with the supplier before you release a drawing.

Chemical composition of 5083 aluminum plate

Al Si Fe Cu Mn Cr Mg Ti Zn Other Each Others Total
Bal 0.40 max 0.40 max 0.10 max 0.40 / 1.0 0.05 / 0.25 4.0 / 4.90 0.15 max 0.25 max 0.05 max 0.15 max

 

Mechanical properties: H116 versus H111 aluminum plate

Temper Tensile strength (MPa) Proof strength (MPa) Elongation (%) Typical use
5083 H116 plate up to 12.7 mm ≥ 305 ≥ 215 ≥ 10 Hull plating and wet decks
5083 H321 plate up to 12.7 mm 305 – 380 215 – 295 ≥ 10 Structural frames and deckhouses
5083 H111 plate 6.3 – 12.5 mm 270 – 345 ≥ 115 ≥ 16 Deep-formed panels and tank shells
5083 H111 plate 12.5 – 50 mm 270 – 345 ≥ 115 ≥ 15 Welded fabrications and tanks

 

Weight and metal value of 5083 aluminum plate

At a density of 2.66 g/cm³, plate weight follows weight (kg) = thickness (mm) × width (m) × length (m) × 2.66. For a 20 mm × 2000 mm × 8000 mm plate that is 851.2 kg. At the November H116 listing of 29,470 CNY/t, the metal value is about 25,085 CNY, or roughly 3,761 USD at 6.67.

Weight drives the freight as well as the invoice, so a nesting list that saves one wide plate can pay for the sawing.

 

Ask for the weight per piece on the quotation when you compare two thicknesses.

 

Applications of 5083-H116 aluminum plate

Hull plating, bottom shells and wet-deck plating where the 5083 H116 seawater rating is required by the class drawing.

Deckhouses, superstructures and structural frames where 5083 H321 stabilisation is specified.

LNG tank liners and cryogenic vessels, where 5083 keeps notch toughness at low temperature.

Chemical and storage tanks welded from 5083 H111 plate, where deep forming and weld ductility come first.

Truck bodies, trailer panels and marine partitions that need corrosion resistance at low weight.

 

news-888-200

 

Inspection and testing of 5083 aluminum plate

Each lot is checked for thickness, width, length and flatness, with composition and tensile results recorded on the mill test certificate. Third-party inspection by SGS, BV or TÜV, and class-society survey for marine plate, can be arranged where the contract calls for it.

 

news-798-529

 

Packaging of 5083 aluminum plate for export

Plate is stacked on timber pallets, separated by spacers, wrapped against moisture and strapped for the sea leg. Edges are protected and each bundle is marked with alloy, temper, size and heat number so the pieces sort by the order list on arrival.

 

CCS 5083 H116 Aluminum Plate 6x2000x8000mm PackagingLoading photo

 

About GNEE

Established in 2008, exporting aluminum products to 100+ countries and regions.

Plate, sheet, coil, strip, foil, bar, tube and fabricated parts from one source, so a mixed order leaves on one set of documents.

In-house sawing, cut-to-size, edge milling and protective filming against the order drawing.

Export packing and documents prepared for the destination port, including certificates of origin where the buyer needs them.

 

5083 h116 Aluminum Plate BV NR216 6x2000x6000MM MTC
5083 h116 Aluminum Plate BV NR216 6x2000x6000MM MTC

 

Request a quote for 5083 aluminum plate

Send the temper, thickness, width, length, quantity and destination port.

 

Quotations are benchmarked to SMM, with the metal element confirmed against the SMM A00 quote on the order date. MOQ is flexible - small trial orders and large-volume orders, full container loads and long-term contracts are all accepted. Lead time is 15–30 days. An EN 10204 3.1 mill test certificate comes with each order, and FOB or CIF terms with T/T or L/C payment are available. Enquiries are answered within 24 hours.

Ask for a quote with your 5083-H116 or H111 aluminum plate list; a schedule with sizes and quantities is enough to price the order.

FAQ

Q: What is the 5083-H116 aluminum plate price per ton in November 2026?

A: Supplier listings run 29,470–30,700 CNY/t (≈ 4,418–4,603 USD/t) by thickness and size, on an SMM base of 22,540 CNY/t on November 18. Confirm against the quote on your order date.

 

Q: Why does 5083-H111 plate cost less than H116?

A: H116 adds a stabilising treatment and a seawater exfoliation-corrosion guarantee. H111 is lightly work hardened and formed more easily, so its conversion premium is lower.

 

Q: How much does a 20 mm 5083 aluminum plate weigh?

A: A 20 mm × 2000 mm × 8000 mm plate weighs 851.2 kg at 2.66 g/cm³. At 29,470 CNY/t that is about 25,085 CNY, roughly 3,761 USD at 6.67.

 

Q: What is the difference between H116 and H321?

A: Both reach at least 305 MPa tensile and 215 MPa proof strength under EN 485-2. H116 is stabilised for seawater service; H321 uses controlled stabilisation for structural use at elevated service temperature.

 

Q: Can 5083 plate be cut to my size?

A: Yes. Plate ships full size or sawn and cut to your list, with edge milling and protective film where the plate is fabricated after arrival.

 

Q: Which standard covers 5083 plate?

A: Flat rolled 5083 plate is covered by ASTM B209 and EN 485-2, composition per EN 573-3, with GB/T 3880 available. The certificate names the standard on the order.

 

Q: How often does the aluminum plate price change?

A: The SMM base moves every trading day; the conversion premium changes much less often. Ask for a fresh figure when you fix the order date.