1070 Aluminum Sheet Plate

Sep 09, 2025

Leave a message

1070 is a pure aluminium alloy. It is a wrought alloy with a high corrosion resistance and an excellent brazing ability.

 

1070 aluminium plate is a material used to manufacture some structural parts with specific properties, with high plasticity, corrosion resistance, good electrical conductivity, and thermal conductivity. However, the strength is low; it is not strengthened by heat treatment, and the machinability is not good, so it can accept contact welding and gas welding. Use its advantages to manufacture some structural parts with specific properties, such as aluminium foil made of gaskets and capacitors, electronic tube isolation nets, protective sleeves for wires and cables, nets, wire cores and aircraft ventilation system parts, and decorative parts.

 

1070 aluminium sheet contains 99.7% Al, which is the alloy sheet with the highest Al content in the 1xxx series of industrial aluminium. Therefore, 1070 aluminium alloy has retained the excellent properties of pure aluminium itself, suitable elongation processing, good thermal conductivity, high corrosion resistance, and more. In addition, the mechanical properties of the 1070 aluminium sheet were slightly enhanced by the addition of a few alloying elements. Similarly, as a representative alloy sheet of industrial aluminium, the 1070 aluminium sheet price is economical.

 

1070 aluminium sheet has a conductivity of {20℃ (68℉) (%IACS)} of up to 62 and is second only to copper, silver and gold in thermal conductivity and conductivity.

 

1070 aluminium sheet has excellent resistance to atmospheric and water corrosion, as well as to most acids and organic compounds.

1070 aluminium sheet is a non-heat-treated alloy, which is cooled and processed to improve its strength. It has poor cutting performance, but it can accept contact welding and gas welding, etc.

 

1070 aluminium sheet can be used for producing some structures with specific properties, such as the aluminium gasket and the capacitor, bus groove electronic wire, pipe net, protective sleeve, cable net, wire core, aircraft parts, and trim ventilation system.

In addition, 1070 aluminum sheet is also widely used in products with low strength requirements, such as chemical instruments, sheet workpieces, deep drawing or spinning concave vessels, welding parts, heat exchangers, clock surfaces, plates, nameplates, kitchen utensils, decorations, reflective appliances, etc.

1070 aluminum sheet

Product Name Aluminum Sheet
Standard BS EN 485-2 , ASTM B209 , BS EN 573 , GB/T 3190 etc .
Thickness 0.15-200mm
Material Grade Wrought Aluminum : 2A11 , 2A12 , 2A14 , 3A21 , 3M03 , 5A02 , 5A03 , 5A05 , 5A06 , 7A04 ,
7A09 ,
1000 Series commercial-purity aluminium : 1050 , 1060 , 1070 , 1100
2000 Series Aluminum-copper alloy : 2014 , 2017 , 2024
3000 Series Aluminum-manganese alloy : 3003 , 3004 , 3005 , 3104 , 3105
5000 Series Aluminum-magnesium alloy : 5005 , 5052 , 5083 , 5182 , 5754 , 5086 , 5454
6000 Series Aluminum-magnesia-silicon alloy : 6061 , 6063 , 6005 , 6082 , 6063
7000 Series Aluminum, zinc, magnesium, copper alloy : 7005 , 7075 , 7050
Surface Treatment Hairline , Mirror , Embossing , Brush , Anodic Oxidized , Color Coated , Sand Blasting , Polished , Powder Coating , Oxidized , Mill Finish etc .
Application 1.Lighting decoration
2. solar reflector
3. architectural appearance
4. interior decoration: ceiling, wall, etc.
5. furniture, cabinets
6. elevators
7. signs, nameplates, bags
8. interior and exterior decoration of cars
9. Interior decorations: such as photo frames
10. Household appliances: refrigerators, microwave ovens, audio equipment, etc.
11. Aerospace and military aspects, such as China's large aircraft manufacturing, Shenzhou spacecraft series, satellites, etc.
12. Mechanical parts processing
13. Mold manufacturing
14. Chemical/insulation pipe coating.
15. High-quality ship board
Container 20-25T / 20'GP , 40GP , 40'HQ
Package Carton , Wooden Box , Pallets , etc .

 

1070 aluminum sheet plate