Commercial Aluminum Foil: Performance, Grades and Selection Guide

Apr 24, 2025

Leave a message

Core Performance of Commercial Aluminum Foil

Commercial aluminum foil is manufactured by rolling aluminum strip to very thin gauges. Its combination of low weight, excellent barrier performance, thermal reflectivity, electrical conductivity, and formability makes it suitable for packaging, insulation, electrical, industrial, and other applications.

 

Typical commercial aluminum foil thicknesses range from approximately 0.006 to 0.20 mm (6–200 μm), although the available range depends on the alloy, temper, rolling equipment, and end use. Very thin gauges are commonly used for packaging and electrical applications, while thicker foil is used for insulation, industrial wrapping, and heavy-duty laminates.

 

Common surface conditions include mill finish, bright finish, and double-sided bright or one-side bright/one-side matte finishes. Surface appearance depends on the rolling process, lubrication, and whether the foil is produced as single-web or double-web material.

Property Typical / General Performance Important Note
Tensile strength Approximately 70–200+ MPa Strongly dependent on alloy, temper and thickness
Density Approx. 2.70 g/cm³ Much lighter than copper and steel
Solar reflectivity Often about 80–95% for bright aluminum surfaces Depends on surface finish, wavelength and measurement method
Water-vapor barrier Extremely high when foil is continuous and pinhole-free Performance of a laminate also depends on seals and other layers
Oxygen barrier Essentially impermeable in a continuous foil layer Pinholes, cracks and seals determine practical package performance
Thermal conductivity Approximately 200–235 W/(m·K) for many high-purity grades Varies with alloy and temperature
Electrical conductivity High, particularly for 1xxx-series alloys Exact value depends on alloy and temper

Aluminum foil is often described as an excellent or near-total barrier to light, moisture, oxygen, and many contaminants. However, this does not mean that every foil package provides a perfect barrier. Microscopic pinholes, folds, cracks, coating defects, seams, and package seals can affect actual barrier performance.

 

For reflective insulation, foil's performance also depends on the surface condition and whether the foil faces an appropriate air space. Reflective foil should therefore be evaluated as part of the complete insulation system rather than as a standalone thermal-insulation material.

 

Alloy Selection by Application

Application Common Alloy Choices Reason
Food and pharmaceutical packaging 8011, 1235, 8079 Good foilability, formability and barrier performance
Household and flexible packaging 8011, 1235, 8079 Good rolling performance and forming characteristics
Building and HVAC insulation 8011, 1235, 3003 Suitable strength and compatibility with laminated insulation systems
Cable and electrical shielding 1235, 8011 and selected electrical-grade alloys Good conductivity, flexibility and shielding performance
Battery current collectors Specialized 1xxx-series battery foil High conductivity, surface quality and tight thickness control
Industrial wrapping 8011, 1235, 8079 Good combination of strength and foilability

1235 Aluminum Foil

1235 is a high-purity 1xxx-series alloy with excellent foilability, ductility, and electrical conductivity. It is widely used for packaging foil, cable applications, and various industrial laminates.

8011 Aluminum Foil

8011 is one of the most widely used alloys for commercial aluminum foil. It provides a useful balance of strength, formability, corrosion resistance, and rolling performance. It is commonly used for food packaging, household foil, pharmaceutical packaging, cable wrapping, insulation laminates, and closures.

8079 Aluminum Foil

8079 is widely used for applications requiring excellent foilability and forming performance, particularly in flexible packaging and pharmaceutical foil. It should not be selected simply because the application is described as "high temperature." Temperature resistance depends on the complete material system, temper, coating, laminate, and actual service temperature.

3003 Aluminum Foil

3003 is an Al-Mn alloy with higher strength than many 1xxx-series alloys. It is commonly used for heat exchangers, cookware, insulation products, and selected industrial applications. It is not automatically the preferred alloy for electronic EMI shielding; shielding applications should be specified according to conductivity, thickness, mechanical requirements, laminate construction, and grounding design.

 

Selection and Purchasing Notes

When purchasing commercial aluminum foil, specify at least the alloy, temper, thickness, width, surface condition, core size, coil weight, and applicable product standard. For laminated or coated foil, also specify the coating or adhesive system and required performance.

For food-contact applications, compliance must be assessed against the regulations applicable to the destination market and the complete finished product. In the United States, for example, applicable FDA requirements may apply to food-contact materials. The alloy designation alone does not establish food-contact compliance.

 

ISO 9001 is a quality-management-system certification, not an aluminum foil product standard. Similarly, RoHS compliance is relevant to certain electrical and electronic products and should not be treated as a universal requirement for all industrial foil.

Common material standards may include ASTM B479, ASTM B209 where applicable to sheet/plate products, EN 546 for aluminum foil, and relevant national or customer specifications. The exact standard should be confirmed according to the product and intended application.

 

For quality control, buyers should request a mill test certificate (MTC) covering chemical composition and relevant mechanical or dimensional properties. For critical applications, additional inspection may include thickness measurement, tensile testing, surface inspection, pinhole testing, coating adhesion, conductivity, and barrier-performance testing.

 

The correct commercial aluminum foil is therefore selected by matching alloy, temper, thickness, surface, and construction to the actual application, rather than choosing a grade based only on its name or nominal thickness.

8011 aluminium foil jumbo rollpharmaceutical aluminum foil