W‌hat is Extra Heavy Duty Aluminum Foil

Apr 24, 2025

Leave a message

I. Definition and core parameters ‌
‌Thickness and strength‌: Compared with conventional aluminum foil (thickness 0.006-0.02mm), the thickness of Extra Heavy Duty aluminum foil can reach ‌0.03-0.1mm‌, and the tensile strength is increased by 50%-80%, which can withstand heavy object puncture and high temperature deformation.
‌Material properties‌: It uses more than 99.5% high-purity aluminum foil. Some products add iron (Fe) and silicon (Si) elements to enhance mechanical properties. The surface roughness is ≤0.3μm to adapt to the composite process.
‌II. Typical application scenarios‌ ‌Food industry‌:
Commercial oven/steam cabinet lining, 8011 catering aluminium foil withstands high temperatures above 200℃ and grease penetration;
Meat/seafood cold chain packaging, 8011 waterproof aluminium foil has a water vapor barrier efficiency of ≥99% (ISO 2528 standard).
‌Architecture and Industry‌:
Reflective film for pipe insulation layer, infrared reflectivity ≥90%;
Anti-corrosion coating for heavy equipment, salt spray resistance test ≥500 hours (ASTM B117).
‌III. Mainstream brands and specifications‌
Gnee provides 130 square feet (about 12.08㎡) large aluminum foil rolls, suitable for continuous cutting needs of commercial kitchens; Gnee also supports customized width (30cm-1.6m) and composite PE/PET coating.
‌IV. Selection recommendations‌
‌High temperature scenarios‌: Prioritize anodized coating models, extra wide aluminum foil with a temperature resistance upper limit of 300℃;
‌Flexibility requirements‌: O-state (soft) aluminum foil elongation ≥20%, suitable for special-shaped packages.