6063 aluminum alloy main alloying elements for magnesium and silicon, with excellent processing performance, excellent weldability, extrusion and plating, good corrosion resistance, toughness, easy to polish, on the envelope, anodic oxidation effect is excellent, is a typical extrusion alloy, is widely used in construction profiles, irrigation tubing, for vehicles, platforms, furniture, lifts, fences, etc. with the tube, bar, profile 6063 is generally used in construction Aluminum alloy 6063 is generally used for construction profiles.



The main alloying elements of 6061 aluminum alloy are magnesium and silicon, and the formation of Mg2Si phase. If contains a certain amount of manganese and chromium, can neutralize the bad effect of iron; sometimes also add a small amount of copper or zinc, in order to improve the strength of the alloy, but not to make its corrosion resistance has been significantly reduced; conductive materials, there are a small amount of copper, in order to offset titanium and iron on the conductivity of the adverse effects of zirconium or titanium can be refined grains with the control of recrystallization of the organization; in order to improve the performance of the machinability, can be added to the lead and bismuth. In Mg2Si, Mg / Si ratio of 1.73, in the heat treatment state, Mg2Si solid fusion in aluminum, so that the alloy has an artificial age hardening function. 6061 requires a certain degree of strength, weldability, and high corrosion resistance of industrial structural parts. 6061 requires a certain degree of strength, weldability and high corrosion resistance of a variety of industrial structural, such as the manufacture of trucks, tower blocks, ships, trolley cars, furniture, Mechanical parts, precision machining and other tubes, rods, shapes, plates.
Overall 6061 has more alloying elements than 6063, so the strength of the material is higher.
