How can you tell the difference between poor quality aluminum panels?

Dec 23, 2024

Leave a message

As we all know, whether it is life or our production purposes will often use the products related to aluminum plate, such as aluminum alloy, heating fan, etc., then in the process of purchasing these products, how to identify the quality of aluminum plate good or bad in fact, there are some tips in.

Four characteristics of poor quality aluminum plate

Unqualified aluminum alloy doors and windows, the use of sunlight, air, rain and other impacts, resulting in deformation of the aluminum plate, and even cause the glass rupture, falling off and other phenomena.

aluminum sheetaluminum sheetaluminum sheet

1, thin oxide film thickness. The standard building aluminum oxide film thickness should be not less than 10um (micron). Thickness is not enough, the aluminum surface is easy to rust, corrosion. Sampling test in some of the production name, address, production license, certificate of conformity of the aluminum plate, the thickness of the oxide film is only 2 to 4um, and some even no oxide film. According to expert estimates per reduction of 1um oxide film thickness, each ton of profiles can reduce the cost of electricity consumption of more than 150 yuan.

2, the chemical composition is not qualified. Mixed with a large number of miscellaneous aluminum, scrap aluminum

Aluminum plate

Can greatly reduce costs, but will lead to the building of the chemical composition of aluminum substandard, seriously endangering the safety of construction projects.

3, reduce the profile wall thickness. 90 series of sliding windows, according to the standard aluminum wall thickness of not less than 1.4mm, some Guangdong products only 0.6 to 0.7mm. 46 series of ground-bouncing door type, the standard use of aluminum wall thickness of not less than 1.62mm, sampling, Guangdong, some of the products only 0.97 to 1.18mm.

4, poor quality aluminum plate to reduce the closed time, reduce the loss of chemicals, the cost down, but the profile corrosion resistance is also greatly reduced.