6061 Aluminum Plate T6 vs T5: Key Differences

Oct 21, 2025

Leave a message

Introduction to 6061 T6 and T5 Tempers

6061 is a popular 6-series aluminum alloy containing aluminum, magnesium, and silicon. Aluminum alloys from the 2, 6, and 7 series can be strengthened by quenching: the product is heated to a specific temperature and then cooled rapidly to produce the required hardness. Both T5 and T6 tempers involve this kind of thermal treatment, but they use different cooling methods, which leads to different final properties. Understanding the difference helps buyers select the right plate for machining, forming, and structural applications.

Quenching: Water Cooling versus Air Cooling

For 6061-T6, the plate is cooled with water immediately after reaching the required high temperature. This fast quench, followed by artificial aging, gives the plate its characteristic hardness and strength. For 6061-T5, the material is rapidly cooled by air after heating, then artificially aged. Water quenching produces a higher hardness level than air cooling, and the T6 aging cycle is shorter than the T5 process, which can take two to three days. As a result, T6 delivers greater hardness and superior mechanical and corrosion-resistant qualities, and it is correspondingly more expensive, typically by a measurable premium per ton.

Why T651 Plate Is Stretched

The T651 temper, widely used in the market, is essentially T6 with an additional stretching step. After quenching, the plate is stretched by a controlled amount, typically 1.0-3.0% plastic deformation, to relieve the internal residual stress created during heat treatment. If this stress is not released, the surface of the plate can bend and wave during later processing such as bending, deep drawing, or heavy machining. Customers who machine or form 6061 plate therefore frequently specify T651 for its dimensional stability and flatness.

Choosing Between T6 and T5

In application, T6 hardness is greater than T5, and 6061-T6 has outstanding corrosion resistance and mechanical properties, making it popular in military, civil, and concrete building applications and in components that carry load. T5 is used where the forming or extrusion process already provides adequate strength, or where the faster, lower-cost aging cycle is an advantage. If the part will be welded, remember that the heat-affected zone loses some aged strength in both tempers, so joint design should account for it.

Technical Parameters and Typical Uses

6061 aluminum plate is typically supplied in thicknesses from 0.3 mm to 500 mm, widths from 100 mm to 2800 mm, and lengths from 500 mm to 16000 mm. Typical products include concrete structures, molds, automobiles, precision machining, mobile phone card slots, and phone casings. For demanding machining and forming work, T651 is the recommended state; for general fabrication where maximum strength is not required, T6 or T5 may be selected based on cost and availability.

FAQ

What is the main difference between T6 and T5?

The cooling method after heating: T6 uses water quenching and T5 uses air cooling. Water quenching gives T6 higher hardness and strength, while T5 is faster and more economical to produce.

Why does 6061-T651 cost more than T6?

T651 includes an extra controlled stretching step that relieves internal stress, which keeps the plate flat and stable during machining. That processing step adds cost but improves dimensional quality.

Is T6 harder than T5?

Yes. Water-quenched T6 achieves higher hardness and strength than air-cooled T5, which is why T6 is preferred for load-bearing and high-corrosion-resistance applications.

Can T6 plate be bent without cracking?

Yes, with appropriate bend radii and tooling. For tight bends and deep drawing, T651 plate is preferred because lower residual stress reduces springback and distortion.

Which temper should I specify for CNC machining?

T651 is the best choice for precision machining because the stress-relieving stretch prevents warping and wave distortion as material is removed.