Sheet Aluminum 1050 1.2mm 18mm 4mm thick aluminium sheet
Product Description
Aluminum in its various forms is stocked in a range of strengths varying from that of Specification 1100-0 (which has a yield strength of around 5000 lbs. per square inch) to that of Specification 7075-T6 (yield strength of about 70,000 lbs. per square inch).
Here are a few typical applications within the range of these specifications -
Utility Sheet, is used for all general sheet metal work such as flashings, ductwork, lining walls, etc.
1100-0 is used primarily for spinning and deep drawing operations such as utensils, ornaments, etc.
1100-H14 and 3003-H14 are specification alloys used for general forming operations.
5005-H14 similar in physical characteristics to 3003-H14 with superior corrosion resistance and a homogenous smooth surface finish suitable for anodizing. This alloy is suitable for curtain walls, decorative trim, control panel boxes and signs, etc.
5052-H32 and H34 is a superior strength alloy of good forming qualities and is especially suited for Marine applications.
5083-H321 and H323 is one alloy of different tempers that produces high weld joint efficiencies. It is used for tank work, heavy transport, etc., where its welded properties can be used to advantage.
5454-H32 is a sister alloy to 5083 with a lower rating to stress corrosion when functioning in the 150°F to 300°F range. Typical uses are truck dump bodies, tanker trucks, exhaust stacks, chemical handling tanks on vessels, etc.
6061-T6 is an excellent all purpose alloy, having high strength and good corrosion resistance. It is used for all structural applications such as mine cars, logging chutes, and ship construction.
Painted Aluminum: 1100, 3003, 3105, 5005 and 5052 are just some of common alloys available in painted product. Painted aluminum is produced in a broad range of mechanical properties and the spectrum of finishes includes high durability exterior coatings, specialized epoxies, polyesters, textured polyesters, fluorocarbons and metallics as well as wash coat primers. Standard colours can be selected from or custom colour matching can be done to specification. Most coatings are available on one and two sides.
| Thick | 0.12 ~6.0 mm |
| Width | 600-1350 mm |
| Hardness Status | H16 H18 H24 0 |
| Coil ID | 508 / 610MM |
| Coil Weight | 3-5 Tons |
| Standard | ASTM-B491; ISO9001 |
| Payment Terms | T/T, LC |
| Regular Order | 25 tons or one container, for less quantity, to contact with us for details |
| Surface Structure | Mil Finish ,Anodic Oxidation,Enameled Wire,Oxidized ,Color Coated,Sand Blasting ,Polished , Power Coating , Brushing ,Embossed ,Coated |
| Surface Treatment | Chromated/Non-Chromated, Oiled/Non-oiled, Skin pass |
Product Parameters
1.Standard
| Aluminum alloy Grades and Status | Tensile Strengthσb (MPa) | Yield lengthσ0.2 (MPa) | Elongationδ5 (%) | HarnessHB) |
| 7075-T6 | 572 | 503 | 11 | 150 |
| Content | |||
| Steel Grade | 7075 | ||
| Not Oiled | |||
| Thickness tolerances | Normal thickness tolerances | 0.40 < thickness ≤ 0.60 | ± 0.060 |
| 0.60 < thickness ≤ 0.80 | ± 0.070 | ||
| 0.80 < thickness ≤ 1.00 | ± 0.080 | ||
| 1.00 < thickness ≤ 1.20 | |||
| Width tolerances | 1200 < width ≤ 1500 | 6 ~ 0 | |
2. Chemical composition
| Designation | Chemical composition % by mass max. | ||||||
| Steel grade | AL | Cu | Si | Mn | Fe | Mg | Cr |
| Steel name | Symbols for the types of available coatings | ||||||
| 5052 | 99.5% | 1.2-2 | 0.4 | 0.3 | 0.4 | 2.1--2.3 | 0.18-0.28 |
|
Item |
Aluminium sheet ,Aluminium plate, Aluminium alloy sheet, Aluminium alloy plate |
|
Standard |
GB/T3190-2008,GB/T3880-2006,ASTM B209,JIS H4000-2006,etc |
|
Material |
1050 1060 1070 1080 1100 3003 3004 5052 5754 5086 6061 6063 7003 7075 8010etc |
|
Thickness |
0.1mm-200mm |
|
Width |
2mm-2200mm |
|
Length |
1-12m or as required |
|
Temper |
0-H112,T3-T8, T351-851 |
|
Surface |
mill, bright, polished, hair line, brush,sand blast, checkered,embossed, etching,etc |
|
Aplication |
1)Further making utensil2)Solar reflective film |
