Premium Aluminum Sheets for Construction - T3-T8 Brushed Finish

Jan 04, 2026

Leave a message

Thickness 0.2mm-500mm
Width 20mm-3000mm
Length As customer's requirements
Temper temper H, temper O, temper T
Features Our company mainly doing with 1,2,3,5,6,7 series aluminum sheet/coil.
For different customers' application.
Application 1) building and construction material
2) decoration
3) curtain wall
4) Shelter
5) oil tank
6) mould
Surface Every pieces could covered with PE film or Paper
Packing Export standard wooden pallets (as per requirements)
Payment Terms 30% T/T in advance as deposit,70% balance against the B/L copy or 100% irrevocable L/C at sight
Minimum Order Quanlity 5-12 tons pre size
Delivery time 30 days after receiving L/C or deposit
Loading Port any port in China
Remark Specific requirement of alloy grade,temper or specification can be discussed at your request

 

aluminum sheet

 

Product introduction

Product Name Aluminum Sheet/Plate
Thickness(mm) aluminum sheet:0.15-6.0 aluminum plate:6.0-25.0
Width(mm) 20-2000
Length 3000mm,6000mm or customized
Standard GB, JIS, DIN, ASTM
Surface treatment Brushed, Mirror, Embossed, Sandblasted, etc
Temper O/H111 H112 H116/H321 H12/H22/ H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.
Type coil/sheet/strips/plate

Package
Standard export package, such as wooden box or as required.
Export wooden pallets, craft paper, anti-blushing agent.
Application Building,Boat,Truck, Tanker,Machine
Quality of material Totally free film defects like white rust, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set.

 

Details

 

Products Model Temper Thickness(mm) Width(mm) Length(mm)
1000 Series Industrial Pure Aluminum(1050,1060 ,1070, 1100) F,O,H12,H14,H16,H18,H19,H22,H24,H26,H28,H111,H112 0.1-500 20-2650 500-16000
2000 Series Aluminum-copper alloys(2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17) F, O,T3,T4,T6,T73,T351, H112 1.0-600 500-2650 500-16000
3000 Series Aluminum-manganese alloys(3A21, 3003, 3103, 3004, 3005, 3105) F, O, H12, H14, H16, H18, H19,
H22,H24,H26, H28,H112, H114
0.1-500 20-2650 500-16000
4000 Series Al-Si alloys(4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A) F, O, H12, H14, H16, H18, H19,
H22,H24,H26, H28,H112, H114
0.1-500 20-2650 500-16000
5000 Series Al-Mg alloys(5052, 5083, 5754, 5005, 5086,5182) F, O, H12, H14, H16, H18, H19,
H22,H24,H26, H28,H112, H114
0.1-600 20-2650 500-16000
6000 Series Aluminum Magnesium Silicon Alloys(6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02) F,O.T4,T6.T651.H112 0.3-600 20-2650 500-16000
7000 Series Aluminum, Zinc, Magnesium and Copper Alloys(7075, 7A04, 7A09, 7A52, 7A05) F,O.T4,T6.T651.H112 1.0-600 <2650 <8000

aluminum sheet

Aluminum Sheets

Aluminum Sheets

 

000 Aluminum Sheet Specifications

Sheets thickness 0.15-2.0mm
Plate thickness 2.0-250mm
Temper Soft and Variety Hard Temper (O-H116) (T2-T6)


5000 Aluminum Sheet Applications

With the same area of other series, the weight of this aluminum sheet is lighter. As a result, it is used in aviation, such as in the fuel tanks in airplanes.
It is widely used in conventional industries

This aluminum sheet can be used in continuously casting and rolling. It can be hot rolled. As a result, it can be used in oxidation and deep processing.

5083 Aluminum Sheet
With excellent corrosion resistance and weldability, together with high strength, this alloy was designed for welded structures requiring maximum joint strength and efficiency. Can be anodized for increased corrosion resistance, but does not lend itself to decorative applications. Not meant to be a machining alloy, but can be machined fairly well with proper preparations. Because of its relatively high magnesium content, the workability rating would only be fair. Non-heat treatable. Typical applications include large marine craft, containers, railroad cars, structurals and elevator cars.

5754 Aluminum Sheet
Excellent corrosion resistance and, unlike the other magnesium alloys, it maintains that rating when functioning in the150-300 degrees F range where the others would be prone to stress corrosion. Not a decorative alloy but well adapted to the applied finishing processes. High strength, excellent weldability, fair formability, and poor machinability. Non-heat treatable. Typical applications include dump bodies, exhaust stacks, marine components, and chemical handling vessels.

 

Packaging & Shipping

1. Packing term:

Standard seaworthy export packing,wooden pallets with plastics protection for the aluminum sheet/plate.

15-20 MT can be loaded into 20' container and 40' container.

The other packing can be made base on the customer requirement.

2. Delivery time:

5-10 workdays (in stock)

20-30 days workdays (out of stock)

According to the quantity

3. Transportation:

By Sea--main port: Shanghai, Qingdao,Tianjin