Customs Clearance Compliance
Importing aluminum profiles requires complete documentation: the original bill of lading, commercial invoice, packing list, and certificate of origin such as FORM E. Recycled aluminum must also submit a radioactive inspection certificate and a health certificate. The packaging must be labeled with the name, size, weight, and standard number of the aluminum material.
Quality Inspection Standards
The surface should be free of cracks, peeling, corrosion, and bubbles; decorative surface pit depth should not exceed 0.03 mm, and longitudinal end deformation should not exceed 10 mm. Dimensional tolerances must meet the applicable standards. Suppliers are required to provide mechanical property reports, such as 6061-T6 profile tensile strength of at least 290 MPa and yield strength of at least 240 MPa. If welding is involved, the filler metal selection, such as 4043 or 5356 alloy, and shielding gas purity must be confirmed.
Surface Treatment Requirements
Anodized film thickness of 5 to 25 micrometers is recommended, fluorocarbon spray film thickness should be at least 30 micrometers, and the salt spray test must pass 3000 hours without corrosion. Pretreatment must thoroughly remove oil stains and oxides to avoid bubbles or color spots after spraying, with a color difference limit of about 1.5 Delta E. Extruded tubes must be free of sand holes and cracks, with wall thickness of at least 1.8 mm for door and window material to ensure wind pressure resistance. Surface treatments must not contain harmful substances such as lead and cadmium, and water-based paint or powder spraying is preferred.
Transportation Protection
Use moisture-proof packaging to avoid extrusion deformation. The material must be fixed and stable during transportation and kept away from corrosive substances.
Supplier and Contract Management
Preferentially select manufacturers with verified quality systems and customs clearance credentials to shorten clearance cycles. Specify quality acceptance standards such as sampling ratio and re-inspection process, return and exchange conditions, liability for breach of contract, and after-sales services such as free replacement of defective products during the warranty period.
Frequently Asked Questions
Q: What documents are needed for import?
A: Bill of lading, commercial invoice, packing list, and certificate of origin; recycled aluminum needs additional certificates.
Q: What surface pit depth is allowed?
A: Decorative surface pits should not exceed 0.03 mm.
Q: What anodized film thickness is recommended?
A: 5 to 25 micrometers.
Q: What wall thickness is required for window profiles?
A: At least 1.8 mm for wind pressure resistance.
Q: What salt spray duration is required?
A: 3000 hours without corrosion for fluorocarbon-coated profiles.
Q: What should the contract specify?
A: Acceptance standards, re-inspection process, returns, and after-sales terms.
For aluminum profile supply with full export documentation, contact our sales team.
