EN AW-6061 Aluminum Fabrication and Heat Treatment

Dec 03, 2025

Leave a message

About 6061 aluminum

GNEE stocks 6061 drawn seamless aluminium tubing. A drawn, seamless aluminum tube is often used in applications that require welding or brazing. Grade 6061 offers excellent corrosion resistance, formability, and machining capabilities. It is known for its outstanding appearance when the tube has been anodized.
6061 was one of the earliest aluminum grades developed in the early twentieth century and is still among the most used today. 6061 aluminum is commonly used where welding or brazing is necessary, or for its exceptionally good corrosion resistance in all tempers due to its significant chromium concentration.

GNEE carries 6061 drawn seamless in round tube shape.

 

EN AW-6061 pipe

Machinability

GNEE aluminum 6061 alloy exhibits good machinability, even in the harder T4 and T6 tempers. It can also be easily machined in the annealed condition.

Forming

GNEE aluminum 6061 alloy can be readily formed and worked when annealed. Standard forming methods such as bending, stamping, deep drawing, and spinning are commonly used.

Welding

GNEE aluminum 6061 alloy demonstrates excellent weldability. Thinner sections are suitable for gas tungsten arc welding (GTAW/TIG), while thicker sections can be welded using gas metal arc welding (GMAW/MIG). Alloy 4043 filler wire can be used to achieve strong welds, though it may affect the T6 temper properties.

Heat Treatment

GNEE aluminum 6061 alloy is heat-treated at 533°C (990°F) for an appropriate duration and then quenched in water. Precipitation hardening can be performed at 160°C (320°F) for 18 hours followed by air cooling, then repeated at 177°C (350°F) for 8 hours, also followed by air cooling.

Forging

GNEE aluminum 6061 alloy is forged at temperatures ranging from 233 to 483°C (750 to 900°F).

Hot Working

Hot working of GNEE aluminum 6061 alloy is typically carried out between 260 and 372°C (500 to 700°F).

Cold Working

GNEE aluminum 6061 alloy can be cold worked in the O temper. Cold forming is also possible in the T4 and T6 tempers.

Annealing

Annealing is performed at 775°F for 2–3 hours, followed by controlled cooling at a rate of 10–260°C (50–500°F) per hour, ending with air cooling.

Aging

Aging of GNEE aluminum 6061 alloy can be done at 177°C (350°F) for 8 hours, followed by air cooling.

Applications

GNEE aluminum 6061 alloy is widely used in:

Truck and marine components

Furniture manufacturing

General structural and high-pressure applications

Pipelines

Heavy-duty structural components

Railroad cars

Tank fittings

6061-Aluminium-Alloy