1. Aluminum angle steel (L-shaped aluminum profile)
Material model:
Common materials are 6063-T5 and 6061, which are suitable for scenes such as buildings and mechanical structures.
Dimensions:
Equal angle aluminum: such as 30×30×3mm, 40×40×4mm.
Unequal angle aluminum: such as 30×20×2mm, 50×30×3mm.
Application scenarios:
Building roof support, frame edging, equipment right-angle connectors.
2. GB standard Model rules:
GB ends with the letter A or G, such as MC-6-3030A and MC-8-4040G.
Mainly light/medium series, such as 3030, 4040, 6060 and other specifications.
Sectional characteristics:
The four corners are right angles, the notch is rectangular, and the chamfer is small, which is suitable for modular equipment frame construction.
3. C-type aluminum steel (purlin/structural parts)
Common specifications and weights:
80×40×20×2.5mm: Weight is about 3.925kg/m.
100×50×20×3mm: Weight is about 5.652kg/m.
120×60×20×3mm: Weight is about 6.594kg/m.
Application scenarios:
Building roof purlins, light steel structure support, storage shelves.
4. Classification of aluminum profile series Distinction between European and national standards:
European standard profiles have rounded chamfers at the four corners (such as 90 series, 100 series), and national standards are right angles.
Special purpose profiles: such as 88 series (arc profiles) are suitable for column and cable trough design.
Heavy and light classification:
Light: such as 3030, 4040 profiles, with low load-bearing but easy to assemble.
Heavy: such as 8080, 100100 profiles, used for high-load-bearing mechanical structures.
V. Marking method and parameter definition
Equal-leg angle steel parameters:
Marked with side width (a), side thickness (t), and length (L), for example, 30×30×3×6m.
Channel steel parameters:
Marked with waist height (h), side width (b), and waist thickness (d), for example, 80×40×20×2.5mm.


