Aluminum profiles can be classified into three categories: basic geometric, special-shaped composite, and functional customized. There are more than 100 specific forms. The appropriate section needs to be selected according to mechanical properties, installation scenarios, and appearance requirements.
1. Basic geometric shapes Angle aluminum (L-shaped): The cross-section is right-angled, divided into equal-angle aluminum and unequal-angle aluminum, mostly used for building frames, equipment reinforcement, and decorative corners. T-shaped aluminum: The cross-section is like the letter "T", often used to connect support structures or as guide rails and dividers. U-shaped aluminum: The cross-section is U-shaped, suitable for wrapping edges, fixing panels, or as slide rails. H-shaped aluminum: The cross-section is similar to I-beams, with high load-bearing capacity, used for heavy frames or support structures. Groove aluminum: The cross-section is a rectangular groove, divided into national standards and European standards, the difference is the angle of the groove (right angle or rounded corners), widely used in non-standard equipment assembly. 2. Special-shaped and composite shapes
Multi-cavity section: Multiple closed or semi-closed cavities are formed through extrusion process to improve structural strength and thermal insulation performance, suitable for complex curtain walls or energy-saving buildings.
Curved profile: Designed for curved curtain walls and decorative lines, continuous bending or segmented splicing can be achieved through customized molds.
Combined section: Such as T-shaped with reinforcement ribs, double-layer groove type, etc., combined with mechanical properties and functional requirements, used for special load-bearing or sealing scenarios.
3. Special functional shapes
Broken bridge insulation profile: Nylon insulation strips are embedded inside to separate the inner and outer cavities to reduce heat conduction, used for energy-saving doors and windows and curtain wall systems.
Decorative line profile: The surface is imitation wood grain, brushed or mirrored, combining functionality and aesthetics, used for indoor and outdoor decoration.
4. Industrial Standard Series
Aluminum profiles are divided into multiple series according to cross-sectional dimensions (such as 15, 20, 30, 40, 50, 60, etc.). Different series correspond to specific slot widths, wall thicknesses and load-bearing levels, adapting to the diverse needs of light equipment to heavy frames.


