GNEE supplies aluminum butt-weld elbows in standard sizes from DN15 to DN350, with custom sizes available above DN350. This page provides the dimension tables you need to specify the right elbow - including DN-to-OD conversion, center-to-end dimensions, radius, and wall thickness schedules.
If you need a quote, send us: OD, wall thickness, angle, radius, connection type, standard, and quantity. For custom sizes, send a drawing.

DN, NPS and OD Conversion Table
One of the most common ordering mistakes: DN is not the actual outside diameter. DN100 does not mean 100mm OD - it means 114.3mm OD (per ASME B36.10M).
Use this table to find the actual OD for your pipe size:
|
DN |
NPS |
Outside Diameter (mm) |
Outside Diameter (inch) |
|
15 |
1/2" |
21.3 |
0.840 |
|
20 |
3/4" |
26.7 |
1.050 |
|
25 |
1" |
33.4 |
1.315 |
|
32 |
1-1/4" |
42.2 |
1.660 |
|
40 |
1-1/2" |
48.3 |
1.900 |
|
50 |
2" |
60.3 |
2.375 |
|
65 |
2-1/2" |
73.0 |
2.875 |
|
80 |
3" |
88.9 |
3.500 |
|
100 |
4" |
114.3 |
4.500 |
|
125 |
5" |
141.3 |
5.563 |
|
150 |
6" |
168.3 |
6.625 |
|
200 |
8" |
219.1 |
8.625 |
|
250 |
10" |
273.0 |
10.750 |
|
300 |
12" |
323.9 |
12.750 |
|
350 |
14" |
355.6 |
14.000 |
Above DN350: Custom production per drawing. Contact us with your required dimensions.
90° Long Radius Aluminum Elbow Dimensions (ASME B16.9)
Long radius (LR) elbow: centerline radius R = 1.5 × NPS (in inches, converted to mm).
|
DN |
NPS |
OD (mm) |
Center-to-End A (mm) |
Radius R (mm) |
|
15 |
1/2" |
21.3 |
38 |
21.1 |
|
20 |
3/4" |
26.7 |
38 |
25.4 |
|
25 |
1" |
33.4 |
38 |
33.0 |
|
32 |
1-1/4" |
42.2 |
48 |
41.9 |
|
40 |
1-1/2" |
48.3 |
57 |
50.3 |
|
50 |
2" |
60.3 |
76 |
63.0 |
|
65 |
2-1/2" |
73.0 |
95 |
76.2 |
|
80 |
3" |
88.9 |
114 |
95.3 |
|
100 |
4" |
114.3 |
152 |
127.0 |
|
125 |
5" |
141.3 |
190 |
158.8 |
|
150 |
6" |
168.3 |
229 |
190.5 |
|
200 |
8" |
219.1 |
305 |
254.0 |
|
250 |
10" |
273.0 |
381 |
317.5 |
|
300 |
12" |
323.9 |
457 |
381.0 |
|
350 |
14" |
355.6 |
533 |
444.5 |
Notes:
Center-to-end dimension (A) is the distance from the elbow centerline intersection to the fitting end face.
Values per ASME B16.9. Tolerance: ±2 mm for sizes up to DN100, ±3 mm for DN125–DN250, ±5 mm for DN300+.
For aluminum welding fittings per ASTM B361, material requirements are specified separately from dimensions.
90° Short Radius Aluminum Elbow Dimensions (ASME B16.28)
Short radius (SR) elbow: centerline radius R = 1.0 × NPS (in inches, converted to mm).
|
DN |
NPS |
OD (mm) |
Center-to-End A (mm) |
Radius R (mm) |
|
25 |
1" |
33.4 |
25 |
33.0 |
|
32 |
1-1/4" |
42.2 |
32 |
41.9 |
|
40 |
1-1/2" |
48.3 |
38 |
50.3 |
|
50 |
2" |
60.3 |
51 |
63.0 |
|
65 |
2-1/2" |
73.0 |
64 |
76.2 |
|
80 |
3" |
88.9 |
76 |
95.3 |
|
100 |
4" |
114.3 |
102 |
127.0 |
|
125 |
5" |
141.3 |
127 |
158.8 |
|
150 |
6" |
168.3 |
152 |
190.5 |
|
200 |
8" |
219.1 |
203 |
254.0 |
|
250 |
10" |
273.0 |
254 |
317.5 |
|
300 |
12" |
323.9 |
305 |
381.0 |
Note: Short radius elbows are not available in all sizes. They produce a tighter turn and higher pressure drop than long radius. Use only when installation space is limited.
45° Aluminum Elbow Dimensions
For a 45° elbow, the center-to-end dimension is shorter than a 90° elbow.
The relationship is: B = A × tan(22.5°) ≈ A × 0.414
|
DN |
NPS |
OD (mm) |
45° LR Center-to-End B (mm) |
45° SR Center-to-End B (mm) |
|
25 |
1" |
33.4 |
16 |
10 |
|
40 |
1-1/2" |
48.3 |
24 |
16 |
|
50 |
2" |
60.3 |
32 |
21 |
|
80 |
3" |
88.9 |
47 |
32 |
|
100 |
4" |
114.3 |
63 |
42 |
|
150 |
6" |
168.3 |
95 |
63 |
|
200 |
8" |
219.1 |
127 |
84 |
|
250 |
10" |
273.0 |
158 |
105 |
|
300 |
12" |
323.9 |
190 |
127 |
Note: 45° values are derived from ASME B16.9 dimensional relationships. Confirm exact values against your project standard before ordering.
180° Aluminum Return Bend Dimensions
A 180° elbow (return bend) reverses pipe direction. Center-to-center (C) and center-to-end (A) dimensions differ from 90° elbows.
|
DN |
NPS |
OD (mm) |
Center-to-Center C (mm) |
Center-to-End A (mm) |
Radius R (mm) |
|
25 |
1" |
33.4 |
76 |
38 |
33.0 |
|
50 |
2" |
60.3 |
152 |
76 |
63.0 |
|
80 |
3" |
88.9 |
229 |
114 |
95.3 |
|
100 |
4" |
114.3 |
305 |
152 |
127.0 |
|
150 |
6" |
168.3 |
457 |
229 |
190.5 |
|
200 |
8" |
219.1 |
610 |
305 |
254.0 |
|
250 |
10" |
273.0 |
762 |
381 |
317.5 |
|
300 |
12" |
323.9 |
914 |
457 |
381.0 |
Note: C = 2×A for 180° return bends (LR). Values per ASME B16.9.
Wall Thickness Schedule Reference
Wall thickness is not determined by DN alone. The same DN100 elbow can have wall thickness from 1.5mm to 8mm depending on the schedule.
|
DN |
NPS |
Sch10 (mm) |
Sch40 (mm) |
Sch80 (mm) |
|
25 |
1" |
1.7 |
3.4 |
4.5 |
|
40 |
1-1/2" |
1.7 |
3.7 |
5.1 |
|
50 |
2" |
1.7 |
3.9 |
5.5 |
|
80 |
3" |
2.1 |
5.5 |
7.6 |
|
100 |
4" |
2.1 |
6.0 |
8.6 |
|
150 |
6" |
2.8 |
7.1 |
11.1 |
|
200 |
8" |
2.8 |
8.2 |
12.7 |
|
250 |
10" |
3.4 |
9.3 |
15.1 |
|
300 |
12" |
3.4 |
10.3 |
17.5 |
Note: These are carbon steel schedule values per ASME B36.10M. Aluminum pipe may use different wall thicknesses - many aluminum piping systems use Schedule 5 or Schedule 10 for lighter weight. Always specify the actual wall thickness in mm rather than relying on schedule numbers alone.
Aluminum Elbow Angle Types
90° - Most common. Changes pipe direction by 90°.
45° - Gradual directional change. Center-to-end is shorter than 90°.
180° (Return Bend) - Reverses flow direction. Used in U-bend and return loop configurations.
Custom - Other angles (30°, 60°, 135°, etc.) available per drawing.
Long Radius vs Short Radius
|
Feature |
Long Radius (LR) |
Short Radius (SR) |
|
Radius |
R = 1.5 × NPS |
R = 1.0 × NPS |
|
Standard |
ASME B16.9 |
ASME B16.28 |
|
Flow |
Smoother, lower pressure drop |
Tighter turn, higher pressure drop |
|
Installation Space |
Requires more space |
Requires less space |
|
Availability |
Widely available |
Limited sizes |
Choose LR when flow characteristics matter and space allows. Choose SR when installation space is limited and pressure drop is acceptable.
Standards
ASME B16.9 - Factory-made wrought butt-welding fittings. Defines dimensions for LR elbows: center-to-end (A), radius (R), and tolerances. This is the primary dimensional standard for butt-weld elbows.
ASME B16.28 - Short radius elbows. Defines dimensions for SR elbows. Referenced separately from B16.9.
ASTM B361 - Factory-made wrought aluminum welding fittings. Covers material requirements, manufacturing, and testing. 1060, 3003, 5083, 6061, 6063, 6082 are listed alloys.
ASME B16.9 vs ASTM B361: B16.9 defines dimensions. B361 defines material and manufacturing. They address different aspects and are often specified together.
We also accept customer specifications, EN, DIN, and GB standards. Send us your applicable standard, and we will confirm compliance before quoting.
Custom Aluminum Elbow Dimensions
Standard sizes cover DN15–DN350. For sizes above DN350 or non-standard configurations, we manufacture per customer drawing:
Non-standard OD
Custom wall thickness
Special angles (30°, 60°, 135°, etc.)
Non-standard radius
Custom end preparation (flanged, threaded, custom bevel)
Special surface treatment
For custom orders, a technical drawing is the most useful input. If no drawing is available, provide: OD, wall thickness, angle, radius, connection type, alloy, quantity, and applicable standard.
How to Order
Send the following for an accurate quote:
|
Item |
Example |
|
Alloy |
1060 / 3003 / 6061 / 6063 / 6082 |
|
Angle |
45° / 90° / 180° / Custom |
|
DN or NPS |
DN100 / 4" |
|
OD |
114.3 mm |
|
Wall Thickness |
3 mm / Sch40 |
|
Radius |
Long Radius / Short Radius |
|
Connection |
Butt Weld / Threaded / Flanged |
|
Standard |
ASME B16.9 / ASTM B361 |
|
Quantity |
200 pcs |
|
Surface |
Mill Finish / Anodized |
|
Inspection |
Standard / Third-party (SGS, BV) |
|
Documentation |
MTC EN 10204 3.1 / 3.2 |
Lead time: 15–35 days for standard sizes. 25–45 days for custom orders.
MOQ: Depends on size and customization. Contact us with your requirements.
If you only know the pipe size: Tell us DN or NPS, pipe standard, alloy, angle, and application. We will confirm the dimensions for you.
Replacing an Existing Elbow
If you need a replacement but do not know the standard, measure the existing fitting:
OD - Measure outside diameter at the straight pipe end (use caliper)
Wall thickness - Measure at the fitting end, or use an ultrasonic thickness gauge
Center-to-end - Measure from the elbow centerline to the end face
Angle - Confirm 45° / 90° / 180° / custom
Radius - Estimate centerline radius from the fitting geometry
End preparation - Check if plain, beveled, threaded, or flanged
Photos with a ruler or caliper in the frame help us identify the fitting. Send measurements + photos for a faster quote.
Other Aluminum Fitting Dimensions
GNEE supplies a complete range of aluminum butt-weld fittings with dimension tables available on request:
Aluminum Tees (Equal / Reducing) - per ASME B16.9
Aluminum Reducers (Concentric / Eccentric) - per ASME B16.9
Aluminum Crosses - per ASME B16.9
Aluminum Pipe Caps - per ASME B16.9
Aluminum Couplings
Aluminum Flanges - per ASME B16.5 / EN 1092
Quality Inspection
Every order is inspected per agreed requirements:
Dimensional: OD, wall thickness, angle, center-to-end, radius, end geometry - per ASME B16.9 tolerances
Surface: No cracks, dents, deep scratches, forming defects
Material: Alloy verification per mill test certificate (EN 10204 3.1/3.2)
Third-party inspection: SGS, BV, TUV available on request

FAQ
What is the center-to-end dimension of a DN100 90° LR aluminum elbow?
152 mm per ASME B16.9. For a short radius elbow, it is 102 mm. See the dimension tables above for all sizes.
What wall thickness should I specify? Many aluminum piping systems use Schedule 5 or Schedule 10 for lighter weight. For DN100, Sch10 = 2.1mm, Sch40 = 6.0mm. Specify the actual wall thickness in mm, not just the schedule number.
Can you make elbows above DN350? Yes, as custom production. Send us a drawing or provide: OD, wall thickness, angle, radius, connection type, alloy, and quantity. We will confirm the manufacturing method and quote.
What is the lead time? 15–35 days for standard sizes (DN15–DN350). 25–45 days for custom orders or sizes above DN350. Actual lead time depends on quantity and production schedule.
Do you provide MTC? Yes. Mill Test Certificate per EN 10204 3.1 is provided with qualifying orders. Type 3.2 (third-party certified) is available on request.
Request a Quote
Send us your elbow specifications - size, OD, wall thickness, angle, radius, connection, standard, and quantity. For custom sizes above DN350, send a drawing.
GNEE is an aluminum pipe fitting manufacturer supplying standard and custom elbows to industrial customers worldwide. Quote within 24 hours.
Contact us today.
