Aluminum alloy 5083 has different physical and mechanical properties in O and H111 tempers, and these performance differences determine their suitability for different application scenarios.
The following is a detailed comparison of 5083-O aluminum plate and 5083-H111 aluminum plate:
Alloy composition and basic properties
5083 aluminum alloy: It belongs to the Al-Mg alloy system, and the main alloying element is magnesium, so it has good corrosion resistance, weldability and medium strength. This alloy is generally used in occasions that require high corrosion resistance, good weldability and medium strength, such as welded parts of ships, automobiles and aircraft plates.
Difference between O and H111
5083-O tempering:
O tempering means that the 5083 aluminum plate has been fully annealed to the softest state.
Due to full annealing, the strength and hardness of 5083-O aluminum plate are relatively low, but the plasticity and ductility are good.
5083 O aluminum sheet is easy to bend, stamp and other forming processes, and is not easy to crack or break. Therefore, it is suitable for occasions that do not require high strength but require good formability and corrosion resistance, such as aluminum alloy street light poles, automobile body aluminum sheets, etc.
5083-H111 state:
H111 tempering indicates that the 5083 aluminum sheet has been work-hardened and partially annealed to eliminate stress and improve stability.
Compared with the O state, the strength and hardness of the aluminum sheet in the 5083-H111 state are improved, but it still maintains good plasticity and ductility. Although it is not as easy to bend as the O state, it can still be formed to a certain extent.
At the same time, due to the increase in hardness and strength, the H111 aluminum sheet has better stability when subjected to external forces, so it is suitable for occasions that require certain strength and hardness, as well as good corrosion resistance and weldability, such as ship structures, automobile fuel tanks, etc.
Summary of 5083 O and h111 aluminum plates:
When choosing 5083 aluminum alloy, the appropriate material state should be selected according to the needs of the specific application scenario. If good formability and corrosion resistance are required, and the strength requirement is not high, 5083-O aluminum plate can be selected.
If a certain strength and hardness are required, and good corrosion resistance and weldability are required, 5083-H111 aluminum plate can be selected.
From the perspective of mechanical properties, the strength and hardness of 5083-H111 aluminum plate are higher than those of 5083-O aluminum alloy plate, but the plasticity and ductility are slightly inferior to those of O state.
From the perspective of processing performance, 5083-O aluminum is easier to bend, stamp and other forming processes.
GNEE provides bending, punching, cutting, CNC processing, welding and other services, welcome to consult.


