5052 vs 5083 Marine Aluminum Plate

Nov 11, 2025

Leave a message

 

Yes, 5086 aluminum is indeed bendable, particularly in its annealed ("O" temper) form, making it ideal for applications that require bending, stamping, and other precision forming processes. In the O temper, 5086 aluminum exhibits excellent formability with a smaller minimum bend radius of 1t1t1t (where ttt represents the thickness of the material).

 

However, as the aluminum undergoes cold working to increase strength (in tempers such as H32, H34, and H116), its bendability decreases, requiring a larger minimum bend radius to prevent cracking. This makes the O temper the most formable, while higher tempers require more force and result in larger bend radii.

 

5086 aluminum is especially well-suited for marine applications, such as boat hulls and superstructures, due to its combination of excellent corrosion resistance in seawater and good formability.

5086 aerospace aluminum plate

Key factors affecting bendability:

Temper: The temper of aluminum affects its hardness. The O temper is the softest and most formable, while cold-hardened tempers like H116 and H32 are harder and require larger bend radii.

Thickness: The thicker the material, the more force is required to bend it, and the larger the minimum bend radius becomes. For instance, bending "3/16"-thick material at 90º typically requires a press brake.

 

At GNEE, we offer a range of 5086 aluminum products that are ideal for bending and forming processes in marine and other industrial applications, ensuring high strength, durability, and corrosion resistance.

 

Marine 5086 aluminum sheet and plate are specifically intended for ship deck applications, with a number of remarkable properties. These aluminum components have a low density, making them lightweight and useful in shipbuilding, improving fuel efficiency, and boosting payload capacity. With great tensile strength and elongation, they can endure huge loads and dynamic forces encountered on ship decks.

Furthermore, aluminum 5086 has excellent corrosion resistance, ensuring durability in hostile marine situations. Its medium strength and superior weldability increase its appropriateness, making it a popular choice for marine-grade aluminum plates on ship decks.

 

The 5086 aluminum sheet and plate are available in several tempers to meet specific application requirements. The commonly used tempers for 5086 aluminum are O, H111, H112, H116, and H321.

 

O Temper: The O temper refers to fully annealed aluminum, which is the softest form, offering maximum formability but with the lowest strength. It is ideal for applications where high formability is needed but strength is not the primary requirement.

H111 Temper: The H111 temper is stress-relieved, achieved by controlled heat treatment. It provides enhanced strength and corrosion resistance over the O temper, making it well-suited for marine applications.

H112 Temper: The H112 temper is similar to H111, offering comparable strength and corrosion resistance, but it is designed specifically for aluminum plates. It provides good formability and weldability for marine applications.

H116 Temper: The H116 temper is strain-hardened, offering excellent mechanical properties with high strength and good corrosion resistance. It is commonly used for marine applications where enhanced strength and durability are required.

H321 Temper: The H321 temper is a stabilized condition achieved by strain hardening and artificial aging. It offers excellent strength, corrosion resistance, and crack resistance, making it ideal for critical marine applications.

Thickness and Hardness

Chemical Composition of Aluminum 5086:

Element % by Weight
Al Residual quantity
Si ≤ 0.40%
Cu ≤ 0.10%
Mg 3.5 - 4.5%
Zn ≤ 0.25%
Mn 0.20 - 0.7%
Ti ≤ 0.15%
Cr 0.05 - 0.25%
Fe ≤ 0.500%

 

Mechanical Properties of Aluminum 5086 (Temper-specific):

Temper Tensile Strength (KSI) Yield Strength (KSI) Elongation (%)
O 44 14 16
H32 47 28 12
H112 35 14 14
H116 40 28 10

 

At GNEE, we provide high-quality 5086 aluminum in various tempers, ensuring the right material for your specific marine and industrial needs. Whether you're looking for superior strength in H116 or excellent formability in O temper, we offer tailored solutions to meet your project requirements.