For the performance degradation caused by poor collection of the shunt ribs, the length of the ribs and the surface, the ribs and the ribs should be appropriately increased, or the compression ratio should be increased. Changes in the die pressure can be adjusted by changing the length of the straight section of the die. In the mold design stage, different compression ratios can be selected to change the extrusion pressure. However, it must be noted that the compression ratio of the die head must be consistent with the compression ratio of the extruder screw. You can also increase the extrusion pressure by changing the formula and adjusting the extrusion technical parameters.
Porous plate to change the size of the melt pressure. 6061 aluminum plate has incomparable advantages over steel such as oxidation resistance and corrosion resistance. With the development of social economy, the market demand for 6061 aluminum plate is increasing. An increasing number of steel plate and iron plate manufacturers have begun to transform and operate the 6061 aluminum plate business. However, Due to technical deficiencies, the produced 6061 aluminum plates often have problems of one kind or another.