1060 aluminum plate is a kind of aluminum plate with 99.6% aluminum content, also known as pure aluminum plate, which belongs to the commonly used series in the family of aluminum sheet and strip. The following is a detailed introduction to 1060 aluminum plate:
I. Basic Properties
Density: 2.68~2.8g/cm³ (data given by different sources vary slightly, but are within this range)
Modulus of elasticity: 69GPa
Second, chemical composition
The main chemical composition of 1060 aluminum plate includes:
Aluminum (Al): 99.6%
Silicon (Si): 0.25%
Copper (Cu): 0.05%
Magnesium (Mg): 0.03 percent
Zinc (Zn): 0.05 percent
Manganese (Mn): 0.03 percent
Titanium (Ti): 0.03 percent
Vanadium (V): 0.05 percent
Iron (Fe): 0.35%
Third, mechanical properties
1060 aluminum plate at room temperature mechanical properties are as follows:
Tensile strength: 70~130MPa
Yield strength: 35~125MPa
Shear strength: 50~75MPa
Fatigue strength: 20~45MPa
Elongation: 6~43
Hardness: 35HB
Physical properties
1060 aluminum plate has good electrical conductivity, thermal conductivity, weldability and ductility. It is easy to withstand a variety of pressure processing and lead, bending, and at the same time has good corrosion resistance and anti-fatigue properties, can extend the service life of the product.
Fifth, processing performance
1060 aluminum plate is excellent in mechanical processing, can meet the conventional processing needs, such as stamping, stretching and so on. Its high formability, easy to process into various shapes and structures. In addition, its low hardness makes it easy to perform operations such as cutting and bending.
Sixth, application areas
The application fields of 1060 aluminum plate are very wide, mainly including:
Aerospace, transportation and other fields (such as aircraft skins, car bodies, etc.)
Signboards, billboards, building exterior decoration, etc.
Lamp holders, fan blades, electronic parts, chemical instruments, thin plate processing parts, etc.
Deep-drawing or spinning concave vessels
Welding parts, heat exchangers, clock faces and plates, nameplates, reflective devices, etc.
Aluminum-plastic plate, aluminum busbar, capacitor shell, automobile radiator, new energy vehicle charging pile, molds, etc.
Surface treatment
1060 aluminum plate can be enhanced by a variety of surface treatment methods, such as:
Oxidation treatment: increase wear resistance and corrosion resistance, improve surface hardness
Spraying treatment: forming various color coatings on the surface of aluminum plate to enhance the aesthetics and corrosion resistance.
Electroplating treatment: deposition of a layer of metal or alloy on the surface of aluminum plate to improve its corrosion resistance and aesthetics.
Eight, specification parameters
1060 aluminum plate specifications parameters usually include:
Thickness: 0.1~500mm
Width: 100~2650mm
Length: customized according to demand
Nine, precautions
When using 1060 aluminum plate, you need to pay attention to the following points:
Select the appropriate specification and state according to the specific application scenario (e.g. F, O, H, etc.)
Pay attention to the control of processing temperature and stress changes during processing to avoid adverse effects on material properties
Appropriate surface treatment as needed to improve its corrosion resistance and aesthetics
In summary, 1060 aluminum plate occupies an important position in the metal processing industry with its excellent performance and wide range of applications.