1050A H14 Aluminum Sheet Overview
If you are looking for a cost-effective aluminum material with excellent corrosion resistance and formability, 1050A H14 aluminum sheet is an ideal choice. As a trusted supplier, GNEE offers high-quality 1050A H14 aluminum sheets with stable performance, fast delivery, and customizable options. Contact GNEE today to get a competitive quote and expert technical support.
What Is a 1050A H14 Aluminum Sheet?
The 1050A H14 aluminum sheet belongs to the 1xxx series of commercially pure aluminum alloys, containing a minimum of 99.5% aluminum. The H14 temper indicates that the material has been work-hardened to a half-hard condition by rolling, without subsequent annealing.
This alloy is widely recognized for its excellent corrosion resistance, high ductility, and bright reflective surface, making it a preferred material for general sheet metal fabrication where moderate strength and superior workability are required.
Key Characteristics of 1050A H14 Aluminum Sheet
The popularity of 1050A H14 aluminum sheet comes from its balanced combination of physical and mechanical properties:
- Outstanding corrosion resistance, suitable for humid and mildly corrosive environments
- High ductility and formability, ideal for bending, rolling, and deep drawing
- Highly reflective surface finish, perfect for decorative and lighting applications
- Moderate mechanical strength, sufficient for non-structural components
These features make the 1050A H14 aluminum sheet a reliable choice across multiple industries.
Applications of 1050A H14 Aluminum Sheet
Thanks to its versatile performance, 1050A H14 aluminum sheet is commonly used in:
- Chemical processing equipment
- Food industry containers and packaging
- Pyrotechnic powder applications
- Architectural flashings and trims
- Lamp reflectors and lighting components
- Cable sheathing and insulation layers
Its cleanliness, corrosion resistance, and ease of fabrication make it especially suitable for food, chemical, and architectural uses.
Chemical Composition of 1050A H14 Aluminum Sheet
Standard: BS EN 573-3:2009
| Element | Content (%) |
|---|---|
| Aluminum (Al) | Balance (≥ 99.5) |
| Iron (Fe) | ≤ 0.40 |
| Silicon (Si) | ≤ 0.25 |
| Zinc (Zn) | ≤ 0.07 |
| Manganese (Mn) | ≤ 0.05 |
| Copper (Cu) | ≤ 0.05 |
| Magnesium (Mg) | ≤ 0.05 |
| Titanium (Ti) | ≤ 0.05 |
| Other (each) | ≤ 0.03 |
The high aluminum purity ensures excellent conductivity, corrosion resistance, and workability.
Mechanical Properties of 1050A H14 Aluminum Sheet
Standard: BS EN 485-2:2008
| Mechanical Property | Typical Value |
|---|---|
| Tensile Strength | 105–145 MPa |
| Proof Stress | ≥ 85 MPa |
| Elongation (A) | ≥ 12% |
| Brinell Hardness | ~34 HB |
These properties provide a good balance between strength and formability for sheet metal applications.
Physical Properties of 1050A H14 Aluminum Sheet
| Physical Property | Value |
|---|---|
| Density | 2.71 g/cm³ |
| Melting Point | ~650°C |
| Thermal Expansion | 24 × 10⁻⁶ /K |
| Modulus of Elasticity | 71 GPa |
| Thermal Conductivity | 222 W/m·K |
| Electrical Resistivity | 0.0282 × 10⁻⁶ Ω·m |
Available Sizes of 1050A H14 Aluminum Sheet
| Parameter | Range |
|---|---|
| Thickness | 0.2 mm – 6.0 mm |
| Width | Customizable |
| Length | Customizable |
| Supply Form | Plain sheet, PVC-coated sheet, stucco sheet |
GNEE also provides PVC-coated and stucco-embossed options for enhanced surface protection.
Temper Designation of 1050A H14 Aluminum Sheet
H14: Cold-worked (strain hardened) to half-hard condition, not annealed after rolling
This temper offers improved strength compared to fully annealed material while maintaining excellent formability.
Weldability and Fabrication of 1050A H14 Aluminum Sheet
1050A H14 Aluminum Sheet Weldability
Recommended filler wire (same alloy group): ER1100
For welding with 5083 / 5086 or 7xxx alloys: ER5356
For other aluminum alloys: ER4043
1050A H14 Aluminum Sheet Fabrication Performance
| Process | Rating |
|---|---|
| Cold Workability | Excellent |
| Machinability | Poor |
| Gas Welding | Excellent |
| Arc Welding | Excellent |
| Resistance Welding | Excellent |
| Brazing | Excellent |
| Soldering | Excellent |
Why Choose GNEE for 1050A H14 Aluminum Sheet?
As a professional aluminum manufacturer and exporter, GNEE supplies premium 1050A H14 aluminum sheets with strict quality control, stable chemical composition, and reliable mechanical performance. We support custom sizes, surface treatments, and bulk orders to meet global industrial requirements.
Contact GNEE now for pricing, datasheets, or technical consultation on 1050A H14 aluminum sheet.
