If you are looking for a highly formable, corrosion-resistant aluminum material, 1050 aluminum plate from GNEE is a proven solution. With stable quality, flexible sizing, and reliable delivery, GNEE supplies 1050 aluminum sheets for fabrication, lighting, chemical, and architectural applications worldwide. Contact GNEE today for pricing and technical support.
1000 Series Aluminum Plate Overview
The 1000 series aluminum alloys represent the purest commercially available aluminum grades. Each alloy in this series contains at least 99% aluminum, giving it exceptional resistance to corrosion from chemicals and atmospheric exposure.
Because of this high purity, 1000 series aluminum plates offer:
- Excellent corrosion resistance
- High electrical and thermal conductivity
- Outstanding workability
- Relatively low mechanical strength
These characteristics make the series ideal for applications where formability and corrosion resistance are critical.
1050 Aluminum Plate Introduction and Applications
1050 aluminum plate is the most widely used grade within the 1000 series. It contains a minimum of 99.5% pure aluminum and has the lowest strength among commercial aluminum alloys but exceptional ductility.
The most common temper is 1050 H14 aluminum plate, which is half-hard and extremely easy to bend and form. Due to its high reflectivity, 1050 aluminum sheet is frequently used in the lighting industry for reflectors.
At GNEE, 1050 aluminum plate is supplied with a peel-off PVC protective film on one side, helping prevent surface damage during cutting, fabrication, and transportation.
1050 Aluminum Plate Equivalent Designations
1050 aluminum plate is also known by the following international designations:
AA1050
A91050
S1B
It is important to note that 1050 aluminum is exclusively a sheet and plate specification. Bars, rods, and extrusions are not produced in this grade.
Corrosion Resistance of 1050 Aluminum Plate
Thanks to its 99.5% minimum aluminum content, 1050 aluminum plate offers excellent corrosion resistance. It performs well in outdoor environments and resists chemical attack without rusting.
While it can be used in saltwater environments, aluminum grades such as 5251 may provide better long-term marine performance.
Welding and Fabrication of 1050 Aluminum Plate
Welding Performance
1050 aluminum plate is excellent for welding, brazing, and soldering, making it suitable for a wide range of fabricated components.
Machining Characteristics
Due to its softness, 1050 aluminum plate is not ideal for conventional machining, as tools may clog easily. However, it is well suited for laser cutting and sheet metal processing.
Cold Working and Forming
1050 H14 aluminum plate is designed for cold working and forming. It can be bent sharply, folded back on itself, and reshaped without cracking, making it one of the most ductile aluminum plates available.
Surface Treatment Options for 1050 Aluminum Plate
1050 aluminum plate supports multiple finishing processes, including:
Protective anodizing
Color anodizing
Bright anodizing
Hard anodizing
Polishing
Powder coating
This makes it suitable for both functional and decorative applications.
Chemical Composition of 1050 Aluminum Plate
1050 Aluminum Plate Chemical Composition (%)
| Element | Content |
|---|---|
| Manganese (Mn) | 0.00 – 0.05 |
| Iron (Fe) | 0.00 – 0.40 |
| Magnesium (Mg) | 0.00 – 0.05 |
| Silicon (Si) | 0.00 – 0.25 |
| Copper (Cu) | 0.00 – 0.05 |
| Zinc (Zn) | 0.00 – 0.07 |
| Titanium (Ti) | 0.00 – 0.05 |
| Others (each) | 0.00 – 0.05 |
| Aluminum (Al) | Balance (≥ 99.5%) |
Mechanical Properties of 1050 Aluminum Plate
Typical Mechanical Properties of 1050 Aluminum Plate
| Temper | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) |
|---|---|---|---|
| 1050-O | 60–100 | ≥ 28 | ≥ 35 |
| 1050-H14 | 95–130 | ≥ 85 | ≥ 10 |
| 1050-H18 | Up to 160 | ≥ 145 | ≥ 7 |
Available Sizes of 1050 Aluminum Plate from GNEE
1050 Aluminum Plate Size Range
| Item | Specification |
|---|---|
| Thickness | 0.2 mm – 6.0 mm |
| Width | Up to 2000 mm |
| Length | Up to 6000 mm |
| Temper | O, H14, H18 |
| Surface | Mill finish, PVC coated, anodized |
| Standards | EN, ASTM, GB |
Custom sizes and surface finishes are available upon request.
Why Choose GNEE for 1050 Aluminum Plate?
As a professional aluminum supplier, GNEE offers:
- Strict quality control
- Stable chemical composition
- Competitive factory pricing
- Custom cutting and processing
- Fast global logistics support
Whether for sheet metal fabrication, lighting reflectors, or chemical equipment, GNEE's 1050 aluminum plate delivers reliable performance.
Get a Quote for 1050 Aluminum Plate Today
If you need a dependable 1050 aluminum plate supplier, GNEE is ready to support your project.
Contact GNEE now for detailed specifications, samples, and a competitive quotation on 1050 aluminum plate.
