Ways to focus on corrosion resistance

Jan 22, 2024

Leave a message

Corrosion resistance will vary greatly depending on the use environment, and there are many cases where it is inconsistent with accelerated corrosion tests. For pharmaceutical and food containers, please consider pure aluminum alloys 1100 and 1200.
When higher corrosion resistance is required, consider higher purity aluminum such as 1070 and 1080. In terms of water resistance, use 3003 for fresh water and 5052 or 5083 for seawater.
Al-high Mg alloys, Al-Cu-based alloys, and Al-Zn-Mg-based alloys may cause stress corrosion cracking depending on usage conditions, so caution is required.

 

info-600-600

Ways to think about processability
Extruded materials such as beer cans generally use 1100, 3003, and 3004.
Among ordinary cutting materials, 2011 has excellent cutting performance, but its corrosion resistance is very poor. The appeal of aluminum alloys is that they can be manufactured into profiles with various cross-sectional shapes through extrusion processing. Effective use of cross-sectional shapes can help reduce total costs.
Ways to think about weldability
In terms of MIG and TIG welding, pure Al-based, Al-Mn-based, Al-Mg-based, and Cu-free Al-Zn-based alloys are excellent.
When the strength after welding is important, 7204 and 7003 should be selected, and when corrosion resistance is important, 5083 should be used.
The strength of Al-Mg-Si alloys will decrease after welding.