1050 Embossed Aluminum Sheet: Specifications, Properties, and Industrial Applications
If you are looking for a lightweight, corrosion-resistant, and cost-effective aluminum solution, GNEE's 1050 embossed aluminum sheet offers excellent performance for decorative, thermal, and anti-slip applications across multiple industries. Contact GNEE today to explore customized patterns, tempers, and surface finishes tailored to your project needs.
Overview of 1050 Aluminum Sheet Embossed Products
The 1050 embossed aluminum sheet is manufactured from AA 1050 aluminum alloy, a commercially pure aluminum with a minimum aluminum content of 99.5%. Through a precision embossing process, functional surface patterns are formed on rolled aluminum sheets or coils, enhancing rigidity, slip resistance, and visual appeal without significantly increasing weight.
Thanks to its high purity, 1050 aluminum sheet demonstrates outstanding corrosion resistance, excellent thermal and electrical conductivity, and superior ductility. These characteristics make it widely used in automotive heat shielding, architectural decoration, insulation systems, mechanical equipment, and consumer goods.
1050 Embossed Aluminum Sheet Material Grades and Specifications
Mechanical Properties of 1050 Aluminum Sheet by Temper
| Temper | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) |
|---|---|---|---|
| O (Annealed) | 65–95 | ≥20 | ≥20–40 |
| H14 | 105–145 | ≥85 | ≥2–6 |
| H18 | ≥135–155 | ≥120–140 | ≥1–2 |
Different tempers allow 1050 embossed aluminum sheet to meet various forming and strength requirements, from deep drawing to rigid structural use.
1050 Aluminum Sheet Manufacturing and Embossing Process
The production of 1050 embossed aluminum sheets begins with hot rolling and cold rolling of aluminum coils, followed by embossing using patterned steel rollers.
Common Tempers for 1050 Aluminum Sheet
O Temper (Annealed): Maximum softness and ductility, ideal for deep drawing and complex forming
H14 / H24 Temper: Semi-hard condition balancing strength and formability
H18 Temper: Full-hard state suitable for applications requiring higher rigidity
1050 Embossed Aluminum Sheet Surface Treatment Options
Mill Finish: Natural aluminum appearance
Anodized Finish: Improved corrosion resistance for architectural aluminum sheet applications
PVC / PE / PVDF Coating: Enhanced durability, color variety, and weather resistance
These surface treatments extend the service life of 1050 aluminum sheets in both indoor and outdoor environments.
Key Advantages of 1050 Embossed Aluminum Sheet
- Excellent formability for bending, rolling, and stamping
- High thermal and electrical conductivity for heat dissipation and reflectivity
- Embossed texture increases stiffness without adding thickness
- Strong corrosion resistance for long-term indoor and outdoor use
- Lightweight and fully recyclable, supporting sustainable manufacturing
- Cost-effective alternative to higher-alloy aluminum sheets
- Stable performance in temperatures ranging from -40°C to 150°C
Chemical Composition of 1050 Aluminum Sheet
| Element | Content (%) |
|---|---|
| Silicon (Si) | ≤0.25 |
| Iron (Fe) | ≤0.40 |
| Copper (Cu) | ≤0.05 |
| Manganese (Mn) | ≤0.05 |
| Magnesium (Mg) | ≤0.05 |
| Zinc (Zn) | ≤0.05 |
| Titanium (Ti) | ≤0.03 |
| Other (each) | 0.00–0.05 |
| Aluminum (Al) | Balance |
Physical and Mechanical Characteristics of 1050 Aluminum Sheet
Physical Properties
| Property | Value |
|---|---|
| Density | 2.71 g/cm³ |
| Melting Point | 650°C |
| Thermal Expansion | 24 × 10⁻⁶ /K |
| Elastic Modulus | 71 GPa |
| Thermal Conductivity | 222 W/m·K |
| Electrical Resistivity | 0.0282 × 10⁻⁶ Ω·m |
Mechanical Properties (Typical)
| Property | Value |
|---|---|
| Tensile Strength | 105–145 MPa |
| Proof Stress | ≥85 MPa |
| Brinell Hardness | 34 HB |
| Elongation | ≥12% |
Typical Applications of 1050 Embossed Aluminum Sheet
- Home appliances: refrigerator liners, evaporators, HVAC ducts
- Architecture: stair treads, anti-slip flooring, curtain walls, roofs, elevators
- Transportation: vehicle floors, van panels, ladders, bus bodies
- Thermal systems: solar reflectors, insulation panels
- Printing and signage: coated plates, display racks
- Cookware: woks, frying pans, trays
- Decorative uses: wall panels, ceiling systems, exterior cladding
1050 Aluminum Sheet Applications in the Automotive Industry
1050 Aluminum Sheet for Engine Hood Heat Shields
Inside engine compartments, 1050 embossed aluminum sheet is widely used as a heat shield. Its high thermal conductivity allows rapid heat dissipation, reducing localized overheating while protecting surrounding components.
The embossed structure further improves mechanical rigidity and durability under high-temperature conditions.
1050 Aluminum Sheet for Chassis Heat Protection
In automotive chassis systems, 1050 aluminum sheet reflects and isolates heat from exhaust systems and road surfaces. Its lightweight nature contributes to vehicle weight reduction, supporting fuel efficiency and modern lightweight design standards.
1050 Aluminum Sheet Applications in Building Decoration
Wall and Ceiling Decoration with 1050 Aluminum Sheet
Embossed 1050 aluminum sheet is frequently applied in curtain walls, ceilings, and exterior facades. Its corrosion resistance ensures long-term appearance retention, while embossed textures reduce glare and improve safety.
1050 Aluminum Sheet as Insulation Material
Used in roofs, walls, and ceilings, 1050 aluminum sheet helps reflect radiant heat, enhancing building energy efficiency and indoor comfort.
1050 Aluminum Sheet Applications in Mechanical Equipment
Equipment Heat Shields Using 1050 Aluminum Sheet
For high-temperature machinery, 1050 embossed aluminum sheet acts as an effective thermal barrier, reducing heat accumulation and protecting sensitive components.
Anti-Slip Industrial Surfaces
Embossed aluminum sheet panels are commonly used on operator platforms and workbenches, providing reliable anti-slip performance even in wet or oily environments.
1050 Aluminum Sheet Embossed Pattern Types and Uses
| Pattern | Typical Applications | Key Alloys |
|---|---|---|
| Stucco / Orange Peel | Solar reflectors, lighting panels | 1050, 1060 |
| Hemisphere | Automotive heat shields, ceilings | 1050, 3003 |
| Five-Bar/Rhombus | Anti-slip floors, stair treads | 1050, 5052 |
| Cobblestone | Decorative cladding, interiors | 1050, 1100 |
1050 Embossed Aluminum Sheet Quality Standards and Certifications
Standards: ASTM B209, EN 485, JIS H4000
Surface Hardness (Coated): ≥2H
Impact Resistance: No cracking (ASTM D-2794)
Bend Test: 2T minimum
Export Packaging: Wooden pallets, desiccant, waterproof film
1050 Embossed Aluminum Sheet Selection Guidelines
Select thickness based on load requirements (≥3 mm for heavy-duty use)
Choose anodized or coated finishes for humid or corrosive environments
Confirm embossed pattern compatibility with forming molds before production
Final Thoughts on 1050 Embossed Aluminum Sheet from GNEE
Combining excellent workability, thermal efficiency, slip resistance, and aesthetic flexibility, GNEE's 1050 embossed aluminum sheet is a proven solution for automotive, construction, mechanical, and decorative applications worldwide.
Reach out to GNEE now to request technical support, samples, or competitive pricing for your next aluminum sheet project.
