How is bauxite purified into alumina?
Bauxite is crushed and mixed with sodium hydroxide in the Bayer process. This dissolves aluminum hydroxide while leaving impurities as solids. The solution is filtered and cooled to precipitate pure alumina crystals. Calcination at 1000°C removes water molecules, producing white alumina powder. Each ton of aluminum requires about 2 tons of alumina.
What happens during the electrolytic reduction of alumina?
Alumina dissolves in molten cryolite at 950°C in Hall-Héroult cells. Carbon anodes oxidize while passing 150,000+ amps of direct current. Molten aluminum sinks to the bottom and gets siphoned off periodically. The process consumes 13-15 kWh of electricity per kg of aluminum. Emissions are controlled through dry scrubbers capturing fluoride gases.
How are aluminum ingots transformed into foil stock?
Ingots are homogenized at 600°C to eliminate segregation. Hot rolling reduces thickness from 30cm to 2-6mm through sequential mills. Cold rolling further thins the metal to 0.2-0.6mm with lubricants preventing galling. Intermediate annealing at 350°C restores ductility between rolling passes. Final foil stock has mirror-like surface finishes.
What's unique about the foil rolling process?
Tandem mills roll two sheets simultaneously to achieve micron-level thicknesses. Work hardening requires no heat treatment below 0.1mm thickness. Rolling oils with specific viscosity prevent microscopic cracks. Sophisticated thickness gauges maintain ±0.5μm tolerances. The process can produce foil thinner than human hair (6-20μm).
How is finished foil processed for commercial use?
Slitting machines trim edges and cut master rolls into required widths. Surface treatments apply coatings for heat resistance or printability. Laminators bond foil to paper/plastic for composite packaging. Quality checks measure pinholes (≤20/m²) and tensile strength. Finished rolls weigh 1-10 tons depending on application requirements.



