1050 Aluminum Coil: High-Purity, Corrosion-Resistant Aluminum for Precision Applications
For industries demanding high thermal and electrical performance, GNEE 1050 aluminum coil provides an ideal solution. Known for its high purity, excellent corrosion resistance, and superior conductivity, this aluminum coil is widely used in thermal management, electronics, and research applications. Its lightweight and flexible nature also allows custom fabrication for precision components in laboratory setups, aerospace test assemblies, energy storage systems, and sensor development.
Contact GNEE today to request 1050 aluminum coil for your specialized projects.
Properties and Applications of 1050 Aluminum Coil
GNEE 1050 aluminum coil excels in multiple industrial contexts, including:
Research & Laboratory: Sensor development, cryogenic experiments, and high-performance test assemblies.
Thermal Management: Heat exchangers, energy storage devices, and experimental thermal systems.
Electronics & Energy: Cathode-side current collectors, electrical connectors, and precision components.
Aerospace & Advanced Engineering: Lightweight structures and high-purity aluminum components.
Its exceptional corrosion resistance makes it suitable for chemical environments and electrochemical investigations, providing durability and reliability in demanding conditions.
The minor elements present in 1050 alloy include:
| Element | Typical % Composition | Impact on Alloy Properties |
| Iron (Fe) | 0.0 – 0.40 | Slightly increases strength; minimal effect on corrosion resistance |
| Silicon (Si) | 0.0 – 0.25 | Enhances fluidity during casting; minor effect on corrosion |
| Copper (Cu) | 0.0 – 0.05 | Can improve strength but may reduce corrosion resistance if excessive |
| Manganese (Mn) | 0.0 – 0.05 | Helps in grain refinement and strength marginally |
| Magnesium (Mg) | 0.0 – 0.05 | Minimal influence; higher amounts found in other alloys |
| Titanium (Ti) | 0.0 – 0.05 | Acts as a grain refiner during casting |
| Zinc (Zn) | 0.0 – 0.07 | Minor effect on strength and corrosion |
Tolerances of 1050 Aluminum Coil
| Coil Thickness | Tolerance |
|---|---|
| < 0.01 mm | ±25% |
| 0.01–0.05 mm | ±15% |
| > 0.05 mm | ±10% |
These tolerances ensure precise fabrication and compatibility with high-accuracy applications.
Atomic Properties of 1050 Aluminum Coil
| Property | Value |
|---|---|
| Atomic Number | 13 |
| Crystal Structure | Face-Centered Cubic (FCC) |
| Electronic Configuration | Ne 3s² 3p¹ |
| Valence | 3 |
| Atomic Weight (amu) | 26.98154 |
| Thermal Neutron Absorption (Barns) | 0.232 |
| Photoelectric Work Function (eV) | 4.2 |
| Atomic Radius (nm) | 0.143 |
These atomic characteristics contribute to 1050 aluminum's excellent conductivity and formability.
Mechanical Properties of 1050 Aluminum Coil
| Property | Soft Coil | Hard Coil |
|---|---|---|
| Poisson's Ratio | 0.345 | 0.345 |
| Bulk Modulus (GPa) | 75.2 | 75.2 |
| Tensile Modulus (GPa) | 70.6 | 70.6 |
| Hardness (Vickers, kgf/mm²) | 21 | 35–48 |
| Tensile Strength (MPa) | 130–195 | 50–90 |
| Yield Strength (MPa) | 110–170 | 10–35 |
This range of mechanical properties allows GNEE 1050 aluminum coil to adapt to diverse manufacturing requirements, from lightweight components to moderate-strength parts.
Electrical Properties of 1050 Aluminum Coil
| Property | Value |
|---|---|
| Electrical Resistivity (µΩ·cm) | 2.67 @ 20°C |
| Superconductivity Critical Temp (K) | 1.175 |
| Temperature Coefficient (K⁻¹) | 0.0045 @ 0–100°C |
| Thermal EMF vs Pt (0–100°C) | 0.42 mV |
The alloy's high electrical conductivity supports applications in energy devices, electronic components, and experimental systems.
Specification Of Aluminium Alloy 1050 COILS
| Standards | ASTM B209 / ASME SB209 |
| Temper | O, H12, H14, H16, H18, H19, H22, H24 |
| Thickness | 0.2-50 |
| Width | 100-2600 |
| Length | 500-10000 |
| Surface | Bright, polished, hairline, brush, sandblast, embossed, etching, etc. |
| Finish | Mill, Customer-specific finish |
| Aluminum Sheet/Plate Coating | PVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane and epoxy coating |
| Type |
Hot-Rolled (HR) / Cold-Rolled (CR) Sheet
|
Physical and Thermal Properties of 1050 Aluminum Coil
| Property | Value |
|---|---|
| Density (g/cm³) | 2.7 @ 20°C |
| Melting Point (°C) | 660.4 |
| Boiling Point (°C) | 2467 |
| Latent Heat of Fusion (J/g) | 388 |
| Latent Heat of Evaporation (J/g) | 10800 |
| Specific Heat (J/kg·K) | 900 @ 25°C |
| Thermal Conductivity (W/m·K) | 237 @ 0–100°C |
| Coefficient of Thermal Expansion (10⁻⁶/K) | 23.5 @ 0–100°C |
These properties make GNEE 1050 aluminum coil ideal for heat transfer, cryogenics, and energy-efficient applications.
Conclusion
GNEE 1050 aluminum coil combines high purity, excellent thermal and electrical conductivity, corrosion resistance, and mechanical versatility. It is the perfect choice for laboratories, electronics, aerospace, and energy storage applications where precision and reliability are essential.
Reach out to GNEE today to source premium 1050 aluminum coil for your high-performance industrial or research applications.