Precautions for Surface Treatment of Aluminum Profiles

Apr 10, 2025

Leave a message

1. Pretreatment stage
‌Clean the surface thoroughly‌
Use special degreasers and alkaline solutions to remove oil, dust and oxide layers to ensure that there are no residual impurities.
After cleaning, rinse with clean water several times to avoid residual chemicals affecting the subsequent treatment effect.
‌Oxide layer and impurity treatment‌
Aluminum materials that are severely oxidized or have thick oxide layers need to be mechanically polished and removed before chemical treatment.
2. Treatment process selection
‌Anodizing‌
Control the temperature of the oxidation tank liquid (usually 25-30℃), pH value and aluminum ion concentration to ensure that the oxide film is uniform and dense.
The oxidation time is adjusted according to demand. The general film thickness is controlled at 5-20μm, and heavy-duty applications can be increased to more than 40μm.
‌Electrophoretic coating‌The film thickness must be ≥17μm, which is suitable for clean scenes such as medical and food equipment, but hard objects must be avoided from scratching.
‌Powder spraying‌
Ensure uniform electrostatic adsorption and control the coating thickness at 40-120μm to avoid insufficient corrosion resistance due to excessive thinness.
‌Fluorocarbon spraying‌
Applicable to outdoor or highly corrosive environments, double-layer spraying is required and the film thickness is ≥30μm to ensure weather resistance.
3. Key parameter control
‌Material adaptability‌
High-purity aluminum has a slow oxidation film formation speed and requires a longer processing time; low-purity aluminum is the opposite.
‌Environmental adaptability‌
Electrophoresis, fluorocarbon spraying or anodizing processes (film thickness ≥10μm) are preferred in coastal or high-humidity environments.
‌Film layer performance verification‌
The hardness of the anodized film must be ≥12HV, and the fluorocarbon spraying must pass the UV resistance and salt spray test.
4. Post-maintenance
‌Cleaning and maintenance‌
Use a soft cotton cloth or sponge to clean, and do not wipe with hard objects to avoid damaging the surface coating.
Clean the profile notch regularly to prevent dust accumulation from affecting the sliding or conductive properties of the accessories.
‌High temperature environment treatment‌
Avoid using ordinary spraying processes in high-temperature scenes, and give priority to anodizing or fluorocarbon spraying.

Precautions for surface treatment of aluminum profilesPrecautions for surface treatment of aluminum profiles