Polished Mirror Aluminum Sheet 1100 1050 1060

Jan 22, 2026

Leave a message

5005 5052 H16 H18 H26 H28 H34 H36 H38 H114 H116 temper Aluminum sheet plate


Aluminum sheet is almost always alloyed, which markedly improves its mechanical properties, especially when tempered. For example, the common aluminum foils and beverage cans are alloys of 92% to 99% aluminum. The main alloying agents are copper, zinc, magnesium, manganese, silicon and the levels of these other metals are in the range of a few percent by weight.

5005 Material Introduction

5005 aluminum sheet is magnesium aluminum alloy plate sheet and the strength of the equivalent of 3003, welding, good work-ability, the aluminum alloy is similar to the 3003, with medium strength and good corrosion resistance. The anodic oxide film of 5005 aluminum sheet is brighter than the 3003 alloy, and is consistent with the tone of the 6063 alloy.

Alloy Temper Thickness(mm) Width(mm) Length(mm)
5005

 

Aluminium

Plate

sheet

O,H12,H14,
H16,H18,H19,
H22,H24,H26,
H28,H32,H34
H36,H38,H111,
H112,H114,H 116,H321
0.15-600 20-2600 500-16000

Final product: Cookware, instrument shell, building decoration, high end curtain wall board, etc..



5052 Material Introduction

5052 Aluminum Alloy plate sheet belongs to Al-Mg alloy, cold forming has good processing performance, processing performance, good corrosion resistance, rust proof aluminum alloy 5052 is a most widely used, this alloy has high strength, especially the anti fatigue strength, ductility and high corrosion resistance, in the semi cold hard plastic is good, do not 5052 alloy used for the internal pressure of the beverage cover, the status of H19 material, do first oxidation treatment to improve coating adhesion and corrosion resistance, both sides painted after the tank cover forming processing, my company production of 5052 alloy lid material with good surface quality, stable performance.

Alloy Temper Thickness(mm) Width(mm) Length(mm)
5052

 

Aluminum

Plate sheet

O,H12,H14,
H16,H18,H19,
H22,H24,H26,
H28,H32,H34
H36,H38,H111,
H112,H114,H 116,H321
0.15-600 20-2600 500-16000

Final usage:Aluminum plate for oxidation, marine sheet metal parts, chemical oil storage device



5083 Material Introduction

5083 aluminum plate sheet belong to Al-Mg-Si alloy, the use of a wide range of. The application of 5083 aluminum plate belongs to the high-end field of aluminum processing industry. With the rapid development of domestic rail transit market and the arrival of the era of globalization, it has a huge market prospect. According to the market development of 5083 aluminum sheet and the demand of the light weight, the production of aluminum alloy sheet was increased, and the production process of aluminum alloy sheet was strictly controlled by 5083 aluminum alloy. Sure, the alloy casting process optimization, homogenization heat treatment and rolling, the 5083 ship Haomei with aluminum performance with foreign materials, to meet user requirements, especially to meet the increasing demand of aluminum processing, rail transportation, high-grade car complex parts such as marine, very broad prospects for application.

Alloy Temper Thickness(mm) Width(mm) Length(mm)
5083

 

Aluminium

Plate

Sheet

O,H12,H14,
H16,H18,H19,
H22,H24,H26,
H28,H32,H34
H36,H38,H111,
H112,H114,H 116,H321
0.15-600 20-2600 500-16000

Final product:

The outer plate, the bottom of the ship deck, welding plane plate, a tanker, oxygen generator tower etc.


5086 Material Introduction

Aluminum magnesium alloy and aluminum manganese alloy called antirust aluminum alloy components, because the two have increased their anti-corrosion properties, aluminum manganese alloy is 3003,3004,3105, aluminum magnesium alloy were 5005, 5252, 5251, 5050, 5052, 5754, 5083, 5056, 5086 aluminum plate and so on according to the level of the content of magnesium alloy.

Alloy Temper Thickness(mm) Width(mm) Length(mm)
5086

 

Aluminium

Plate

Sheet

O,H12,H14,
H16,H18,H19,
H22,H24,H26,
H28,H32,H34
H36,H38,H111,
H112,H114,H 116,H321
0.15-600 20-2600 500-16000

Final usage:Aircraft panels can be welded parts, refrigeration equipment, television tower, equipment, transportation equipment, etc.



5182 Material Introduction

5182 aluminum plate sheet belongs to Al-Mg-Si alloy, a wide range of applications, especially in the construction industry can not be separated from this alloy, is the most promising alloy. Good corrosion resistance, good weldability, good cold workability and medium strength. The main alloying elements for 5182 mg, and added a small amount of silicon, so the welding of 5182 aluminum sheet used in gas welding, argon arc welding, spot welding and seam welding performance are good.

Alloy Temper Thickness(mm) Width(mm) Length(mm)
5182

 

Aluminum

Plate

sheet

O,H12,H14,
H16,H18,H19,
H22,H24,H26,
H28,H32,H34
H36,H38,H111,
H112,H114,H 116,H321
0.15-600 20-2600 500-16000

Final Usage:The outer plate, the bottom side of the deck, refrigeration equipment, tanker, oxygen generator tower body

5454 Material Introduction

5454 aluminum plate sheet anti rust aluminum strength than 5052 aluminum plate is 20% higher, its characteristics roughly the same with 5154, but in the harsh environment corrosion resistance is better than 5154.

Alloy Temper Thickness(mm) width(mm) length(mm)
5454

 

Aluminum

Plate sheet

O,H12,H14,
H16,H18,H19,
H22,H24,H26,
H28,H32,H34
H36,H38,H111,
H112,H114,H 116,H321
0.15-600 20-2600 500-16000

Final Usage: Pressure vessel, marine installation pipeline, automobile wheel, oil tank, etc.



5754 Material Introduction

5754 aluminum alloy plate sheet with moderate strength, excellent processing performance, good corrosion resistance, weldability and easy processing characteristics, is a typical alloy of Al Mg alloy. 5754 Aluminum Alloy plates sheets of different heat treatment condition is the automobile manufacturing industry (car door, mould, seals), main materials used for canning industry.

Alloy Temper Thickness(mm) Width(mm) Length(mm)
5754

 

Aluminum

Plate

Sheet

O,H12,H14,
H16,H18,H19,
H22,H24,H26,
H28,H32,H34
H36,H38,H111,
H112,H114,H 116,H321
0.15-600 20-2600 500-16000

Final Usage:Railway passenger car inside and outside the wall, floor, car plate, etc.
5005 5052 H16 H18 H26 H28 H34 H36 H38 H114 H116 temper Aluminum sheet plate


1100 Material Introduction

1100 aluminum plate sheet for industrial pure aluminum, aluminum content (mass fraction) of 99%, non heat treatment. It has high corrosion resistance, electrical conductivity and thermal conductivity, low density, good plasticity, and can be used to produce all kinds of aluminum, but the strength is low. Other processes are basically the same as 1050A. 1100 aluminum sheet commonly used to have good machining performance, high corrosion resistance, high strength does not need not see, such as video and chemical handling and storage equipment, sheet metal products, hardware, hollow spinning drawing goods welding key combination, reflector, nameplate.

Alloy Temper Thickness(mm) Width(mm) Length(mm)
1100 aluminium sheet O,H12,H14,H16
H18,H19,H22,H24
H26,H28,H32,H34
H36,H38
0.2-4.5 100-2600 500-16000

Final product: Cooking utensils, building materials, heat exchanger, etc.


Other Specification

Standard: ASTM B209

Grade:

1XXX: 1050, 1060, 1070, 1100,1230 .

2XXX: 2014, 2024,2124, 2219.

3XXX: 3003, 3004,3005,3105.

4XXX: 4043

5XXX: 5005,5010,5050, 5052,5059,5083, 5086,5154,5252,5454,5754

6XXX: 6003,6061,6063,6082

7XXX: 7050,7075

8XXX: 8011,8079

Temper: O, H12, H14, H16, H18, H20,H22,H24,H26,H28,H32,H34,H36,H111,H112,H114,H116,H321,

F, T3,T4,T6,T651 etc.

 

aluminum sheet

 

aluminum plate