Mechanical performance limit of 5052 H32 aluminum plate

Aug 26, 2025

Leave a message

5052 H32 Aluminum Sheet

5052 aluminum belongs to the 5 series aluminum alloy series, which is an alloy composed of various metals, including 0.25% chromium and 2.5% magnesium, commonly referred to as Al-Mg alloys. Magnesium is the main alloying element and an important factor in improving the performance of 5052.

Mechanical Property Limits(Reference matweb.com data)

Aluminum 5052 h32 Mechanical Properties

Mechanical Properties Metric English Comments
Hardness, Brinell 60 60 AA; Typical; 500 g load; 10 mm ball
Hardness, Knoop 83 83 Converted from Brinell Hardness Value
Hardness, Vickers 68 68 Converted from Brinell Hardness Value
Tensile Strength, Ultimate 228 MPa 33000 psi AA; Typical
Tensile Strength, Yield 193 MPa 28000 psi AA; Typical
Elongation at Break 12 %@Thickness 1.59 mm 12 %@Thickness 0.0625 in AA; Typical
  18 %@Diameter 12.7 mm 18 %@Diameter 0.500 in AA; Typical
Modulus of Elasticity 70.3 GPa 10200 ksi AA; Typical; Average of tension and compression. Compression modulus is about 2% greater than tensile modulus.
Poissons Ratio 0.33 0.33  
Fatigue Strength 117 MPa@# of Cycles 5.00e+8 17000 psi@# of Cycles 5.00e+8 completely reversed stress; RR Moore machine/specimen
Shear Modulus 25.9 GPa 3760 ksi  
Shear Strength 138 MPa 20000 psi AA; Typical

 

aluminium-alloy-sheet-plate5052