What Is Hot Rolled Aluminum Plate?
Hot rolled aluminum plate is produced by rolling preheated aluminum slabs at high temperature, which allows thicker sections to be formed with good internal structure. It is the standard route for plate from about 4 mm up to 150 mm thick. Hot rolled plate offers consistent mechanical properties and is widely used in heavy fabrication, shipbuilding, pressure equipment and structural engineering.
Available Alloys and Tempers
A wide range of alloys and tempers is available. Common marine and structural grades include 5083 in O, F, H111, H112, H116 and H321 tempers, 5052 in O and H32, 5754 in O, H111 and H112, 6082 in T6 and T651, and 7075 in T6 and T651. Other grades such as 1050, 1060, 1070, 1100, 1200, 2024, 3003, 3004, 5086, 5454, 5456, 6061 and 8011 can also be supplied to project requirements.
Thickness and Size Range
Hot rolled plate is typically supplied in thicknesses from 4.0 to 80.0 mm as a standard range, with thicker material up to 150 mm available on request. Widths range from about 400 mm to 1600 mm in the standard range and up to 2800 mm for wider plate, and lengths range from 400 mm to 10000 mm or more. The material can be cut to custom sizes and supplied with mill, bright or embossed surfaces.
Production Standards
Hot rolled aluminum plate is produced in accordance with international and national standards such as ASTM B209, JIS H4000, GB/T 3190 and GB/T 3880. Chemical composition is controlled within the limits of the relevant standard for each alloy, and mechanical properties are verified by testing. Third-party certificates can be provided when required.
Typical Applications
The main applications of hot rolled plate include GIS tanks, instrument transformer tanks, switchgear parts, shipbuilding and marine structures, molds and tooling, and general structural fabrication. The 5xxx marine grades are used for hulls and offshore components, while 6xxx and 7xxx grades are selected where higher strength is needed.
Quality and Ordering Notes
Quality control includes dimensional checks, surface inspection and verification of alloy composition. Plates are checked to minimize scratches, and edges are smooth and free of burrs. When ordering, specify the alloy, temper, thickness, width, length, surface finish and quantity, together with the applicable standard, so that the correct material is supplied.
FAQ
What is the difference between hot rolled and cold rolled aluminum plate?
Hot rolled plate is rolled at high temperature and is used for thicker sections, while cold rolled material is rolled at room temperature for thinner sheet with tighter tolerances and better surface finish.
Which alloys are available in hot rolled plate?
Common grades include 5083, 5052, 5754, 6082 and 7075, plus many other alloys from the 1xxx to 8xxx series on request.
How thick can hot rolled aluminum plate be?
The standard range is about 4 to 80 mm, with thicker plate up to 150 mm available on request.
What are hot rolled plates used for?
They are used in GIS tanks, switchgear parts, shipbuilding, molds, structural fabrication and other heavy-duty applications.
Can plates be cut to custom sizes?
Yes. Plates can be cut to the width and length required by the customer before delivery.
Q: What sizes are typical for hot rolled aluminum plate?
Hot rolled plate is commonly supplied in thicknesses from 6 mm to 200 mm, widths of 1000-2500 mm and lengths of 2000-8000 mm, with heavier plates up to 300 mm produced on plate mills; larger sizes can be supplied as cut-to-order blanks.
Q: What does the hot rolled surface look like?
Hot rolled plate carries a natural mill scale and a slightly textured, grey-silver surface that is rougher than cold rolled sheet; where a smooth finish is needed, the plate can be machined, ground or pickled after rolling.
Q: Which standards govern hot rolled aluminum plate?
The main standards are ASTM B209 and B928, EN 485 and GB/T 3880, with alloy-temper designations per EN 573 or the Aluminum Association; plates for marine, aerospace or pressure use additionally require certified mill test reports.
Q: How is flatness controlled on hot rolled plate?
Plate is rolled under controlled temperature, then leveled by stretcher or roller leveling to meet flatness tolerances such as 3-5 mm per metre for standard plate; precision-flat product can be supplied at about 1.5-2 mm per metre for machining and laser cutting.
Q: What should I specify when ordering hot rolled plate?
State the alloy and temper, thickness, width, length or blank dimensions, edge condition (sawed, sheared or plasma cut), surface requirement, quantity and standard; for critical uses, also specify tolerance class and the need for a mill certificate with chemical and tensile test results.
