GB tolerance for aluminum profiles

Apr 09, 2025

Leave a message

GB tolerance table for aluminum profiles
Weight difference of aluminum profile wall thickness deviation
Taking the national standard GB/T5237.1 as an example, the wall thickness deviation of high-precision profiles is allowed to be within ±0.13mm. Assuming that the theoretical weight per meter of a 1.4mm wall thickness profile is 1.038kg/m, when the positive deviation is 0.13mm, the weight per meter increases to 1.093kg/m, and vice versa, it decreases to 0.982kg/m. The weight difference of one ton of profiles can reach 53kg. If all wall thickness deviations are considered, the weight difference can reach 93kg‌.

Theoretical weight for different wall thickness requirements
Customers have different requirements for profile wall thickness, and the tolerance of wall thickness determines the difference in theoretical weight. For example, when the positive tolerance of a 1.4mm wall thickness profile is 0.26mm, the weight per meter is 1.251kg/m; while the theoretical weight calculation of the negative tolerance profile is determined by the weight per meter when the negative difference is half of the negative difference‌.

Weight difference caused by thickness of surface treatment layer
There are various ways to treat the surface of aluminum profiles, such as oxidation, electrophoresis, spraying, fluorocarbon, etc. These treatment layers will increase the weight of the profile. For example, the thickness of the surface treatment film of oxidation and electrophoresis profiles is generally 10μm~25μm, and its effect on weight is relatively small; while the weight increase of sprayed profiles, especially powder spraying, can reach 4%~5%, and the weight increase of fluorocarbon paint sprayed profiles is 2.0%~3.0%.

Weight difference caused by packaging method
Aluminum profiles are usually packaged in paper packaging and shrink film packaging. The weight increase of paper packaging is usually no more than 6%, while that of shrink film packaging is about 4%. The weight proportion of packaging is affected by the number of packages and the size of the profile. The more packages, the smaller the proportion of packaging.

GB tolerance for aluminum profilesGB tolerance for aluminum profiles