In the modern shipbuilding and offshore engineering industries, material failure is not an option. When constructing vessel hulls, superstructures, or offshore platforms, shipyards require materials that deliver high strength, reliable weldability, and absolute resistance to saltwater corrosion.
Among all marine-grade alloys, the 5083 H116 aluminum plate stands out as the global standard. However, supplying this material requires more than just meeting chemical dimensions; it requires strict legal and quality compliance. At GNEE, we supply premium DNV certified 5083 aluminum plates designed to meet the rigorous demands of classification societies and maritime operators worldwide.

In this comprehensive guide, we will detail the technical specifications, processing benefits, and certification requirements of the 5083 H116 marine aluminum plate and why it is the ultimate choice for your next shipbuilding project.
What is 5083 H116 Marine Aluminum Plate?
The 5083 aluminum alloy plate belongs to the 5000 series (Aluminum-Magnesium alloys). It contains a high magnesium content (4.0%–4.9%), which provides exceptional strength without the need for heat treatment.
However, high-magnesium alloys can be susceptible to intergranular corrosion and exfoliation corrosion when exposed to harsh marine environments over time. This is where the 5083 H116 temper becomes critical.
Unlike standard tempers, 5083 H116 aluminum sheet metal is a specialized marine temper. It indicates that the 5083 H116 marine aluminum sheet has been strain-hardened and meticulously stabilized to control its internal microstructure. This specific processing ensures the plate passes severe ASTM G66 (exfoliation corrosion) testing. When you purchase a 5083 H116 aluminum plate, you are buying guaranteed long-term protection against the aggressive nature of seawater.
Correct Chemical Composition for Marine Grade 5083
For an aluminum plate to survive decades in the ocean, its chemical purity must be strictly controlled. Cheap, uncertified aluminum often contains high levels of iron or copper, which will act as cathodic centers in seawater, causing rapid pitting corrosion.
As a trusted supplier, GNEE strictly adheres to EN 573 and ASTM B928 standards for our marine grade aluminum 5083 H116.
5083 Aluminum Alloy Chemical Composition
| Element | Content (%) |
|---|---|
| Aluminum (Al) | Remainder |
| Magnesium (Mg) | 4.0 – 4.9 |
| Manganese (Mn) | 0.4 – 1.0 |
| Chromium (Cr) | 0.05 – 0.25 |
| Silicon (Si) | ≤ 0.40 |
| Iron (Fe) | ≤ 0.40 |
| Copper (Cu) | ≤ 0.10 |
| Zinc (Zn) | ≤ 0.25 |
| Titanium (Ti) | ≤ 0.15 |
| Others | ≤ 0.15 |
5083 Aluminum Alloy Mechanical Properties
Ship hulls and offshore platforms face dynamic loads from crashing waves, wind, and engine vibrations. The DNV certified aluminum plate in 5083 H116 temper provides the perfect balance of yield strength and ductility, ensuring the hull can absorb impact energy without fracturing.
| Temper | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) |
|---|---|---|---|
| O | 270 – 350 | ≥ 125 | ≥ 16 |
| H111 | 275 – 350 | ≥ 125 | ≥ 12 |
| H112 | 275 – 350 | ≥ 145 | ≥ 10 |
| H116 | 305 – 385 | ≥ 215 | ≥ 10 |
| H321 | 305 – 385 | ≥ 215 | ≥ 10 |
5083 Aluminum Alloy Physical Properties
| Property | Value |
|---|---|
| Density | 2.66 g/cm³ |
| Melting Point | ~570 – 640°C |
| Thermal Conductivity | 121 W/m·K |
| Electrical Conductivity | ~29% IACS |
| Elastic Modulus | 70 GPa |
Why DNV Certification is Non-Negotiable
You cannot legally insure or operate a commercial vessel if the hull materials are not approved by a recognized classification society. DNV (Det Norske Veritas) is one of the most respected maritime classification societies in the world.
When you source a DNV approved 5083 aluminum plate from GNEE, you are not just getting raw metal. You receive full traceability and legal compliance.
- EN 10204 3.2 Certification: Our marine plates come with an authentic 3.2 Mill Test Certificate (MTC). This means an independent DNV surveyor has physically visited the mill, witnessed the mechanical and chemical testing, and verified the heat numbers stamped directly on the plates.
- NDT Testing: Thick plates undergo strict Ultrasonic Testing (UT) to ensure there are no internal voids, inclusions, or laminations that could cause the plate to split during heavy sea swells.
- Weldability Guarantee: DNV rules ensure that the base material behaves predictably during standard shipyard welding procedures, preventing costly rework.

Shipyard Fabrication: Welding and Processing 5083 H116 aluminum plate metal
Shipyards prefer the 5083 H116 shipbuilding aluminum plate because it is highly workable, reducing labor costs and fabrication time.
Excellent Weldability
5083 aluminum retains an impressive 80% to 90% of its original strength in the Heat-Affected Zone (HAZ) after welding. Shipyards typically use Gas Metal Arc Welding (GMAW/MIG) or Gas Tungsten Arc Welding (GTAW/TIG). To maintain the anti-corrosion properties of the hull, it is highly recommended to use ER5183 or ER5356 filler wires.
Cutting and Forming
The material exhibits excellent cold formability. It can be easily cut using plasma, waterjet, or laser cutting without edge cracking. When bending the plates for ship chines or hull curves, manufacturers should follow specific bend radius guidelines based on the plate's thickness to prevent surface tearing.
Primary Marine Applications
The versatility and high strength-to-weight ratio of the EN AW 5083 H116 aluminum sheet make it the standard material for:
- Underwater Hulls & Keels: For luxury yachts, fast ferries, and military patrol vessels.
- Superstructures & Decks: Reducing top-weight to lower the vessel's center of gravity and improve stability.
- Offshore Oil & Gas Platforms: Walkways, helipads, and topside living quarters.
- Cryogenic Marine Applications: 5083 aluminum does not become brittle at sub-zero temperatures, making it ideal for LNG (Liquefied Natural Gas) carriers.

Frequently Asked Questions (FAQ) About 5083 H116 Marine Aluminum

Contact GNEE for Your Shipbuilding Aluminum Requirements
A successful marine project starts with reliable materials. Don't risk your vessel's safety or classification approval by using uncertified or substandard aluminum.
At GNEE, we specialize in supplying DNV, ABS, CCS, and LR certified 5083 marine aluminum plates to major shipyards around the globe. We guarantee precise dimensional tolerances, strict chemical purity, and completely flat surfaces for seamless automated welding.
Ready to streamline your shipyard's supply chain?
Contact GNEE's technical sales team today for a free quote, current inventory check, or to request a sample DNV 3.2 MTC document.
We guarantee a response with accurate pricing and sea freight estimates within 24 hours.


