3003 aluminum plate, commonly referred to as 3003 anti-rust aluminum plate, is a typical aluminum–manganese (Al-Mn) alloy. It contains approximately 98% aluminum and about 1.0–1.6% manganese. Compared with 1060 aluminum plate, 3003 aluminum plate offers higher strength. It features excellent corrosion resistance, good weldability, strong workability, and reliable mechanical strength. As a result, it is one of the most widely used aluminum alloys and is commonly applied in food processing, chemical equipment, fuel tanks, pipelines, and other industrial fields. At GNEE, 3003 aluminum can be supplied in various forms, including 3003 aluminum coils, aluminum sheets and plates, hot-rolled plates, checker plates, and aluminum foil products.
Among the available tempers of 3003 aluminum plate, H24 and H14 are the most commonly used. Both 3003 H24 and 3003 H14 aluminum plates share several similarities: they can be bent to 90 degrees without cracking, belong to the same 3003 alloy series, and show very similar tensile strength, elongation, and corrosion resistance. In addition, their surface treatment processes are generally comparable.
3003 H24
Low hardness
High tensile strength
3003 H14
High hardness
High tensile strength
Low ductility
Differences between 3003 H24 aluminum plate and 3003 H14 aluminum plate
The hardness of an aluminum plate is influenced by multiple factors, including alloy composition, cold-working method, and natural aging time. In temper designations, the letter "H" represents strain hardening, while the numbers that follow indicate different levels and types of cold-work hardening.
3003 H24 aluminum plate
3003 H24 aluminum plate is produced through cold working followed by partial (incomplete) annealing. The final processing step involves heat treatment, resulting in a material with relatively low hardness but high tensile strength. 3003 H24 aluminum plate is suitable for manufacturing high-strength structural components used in applications such as aircraft, ships, and automobiles.
3003 H14 aluminum plate
3003 H14 aluminum plate is a fully cold-worked temper with no additional heat treatment after final rolling. This condition provides relatively high hardness, strength, and tensile strength, but lower ductility. 3003 H14 aluminum plate is well suited for producing various formed parts, including fuel tanks, pipes, covers, and similar products.
