Customs Clearance Process for Aluminium Materials: Documents, HS Codes and Duties

Apr 09, 2025

Leave a message

Customs clearance for aluminium materials is decided long before the container reaches the port. Classification, declared value, origin documentation and technical evidence are all fixed at the time the contract is signed and the goods are packed, and any gap in that chain shows up as demurrage, storage or a re-inspection order.

Documents Required at Export and Import

Document Function
Bill of lading or warehouse receipt Title and proof of shipment
Commercial invoice and sales contract Value, terms of sale, payment basis
Packing list Package count, dimensions, gross and net weight
Certificate of origin Origin claim; a preferential form for reduced duty
Mill test certificate Alloy, temper, chemical and mechanical results
Declaration and power of attorney Authorises the broker to declare on the importer's behalf
Insurance policy, inspection report Loss cover and pre-shipment conformity evidence

The certificate of origin is the highest-leverage document. Where a free trade arrangement applies, a valid preferential certificate, such as the form issued under an ASEAN-China or RCEP arrangement, can remove a substantial part of the tariff; the same rules require the goods to satisfy the origin criteria, so the certificate must be supported by production evidence and not completed after the fact.

HS Classification of Aluminium Products

Classification follows the product form, not the application. Unwrought metal falls under heading 7601; bars, rods and profiles under 7604; wire under 7605; plates, sheets and strip thicker than 0.2 mm under 7606; foil of 0.2 mm or less under 7607; tubes and pipes under 7608; tube and pipe fittings under 7609; other articles of aluminium under 7616. Alloy content, thickness and whether the surface has been processed further can shift the subheading, so the classification should be justified from the mill certificate data rather than from the product name alone.

Duties, Valuation and Preferential Tariffs

Duty is calculated on the customs value, which under the WTO valuation agreement is normally the transaction value, adjusted for freight and insurance where the declared basis requires it. Beyond the ordinary tariff, the importer has to check whether the specific product form and origin fall within an anti-dumping or countervailing measure, since these are applied by product description and can change the landed cost materially. Preferential treatment requires the correct origin certificate plus evidence that the origin criteria are met, and the calculation of regional value content should be documented at order stage.

Inspection, Testing and Technical Requirements

Aluminium shipments are frequently subject to documentary and physical inspection. The technical file should include the mill test certificate at 3.1 level under EN 10204, test results referenced to the applicable product standard, and evidence of compliance with any mandatory regulation of the destination market, including food-contact rules where the material will touch food and packaging-marking rules where applicable. Wooden packaging must meet the phytosanitary requirements of the destination, which in practice means heat treatment or fumigation marking on solid wood pallets and crates.

Common Causes of Delay and How to Avoid Them

Delays cluster in four places: mismatched weights between invoice, packing list and bill of lading; incomplete or late origin certificates; incorrect classification of coated or further-processed coil; and missing technical documentation for regulated end uses. Pre-clearance is the practical remedy, with documents exchanged for verification before departure, a classification ruling obtained for unusual products, and a single set of weights used consistently across all commercial documents. Adding a pre-shipment quality inspection report to the file reduces the chance of a hold for physical examination.

Frequently Asked Questions

Q: Which HS heading covers aluminium coil?
A: Coil thicker than 0.2 mm is classified under heading 7606 as plate, sheet and strip; foil of 0.2 mm or less falls under heading 7607.

Q: What does the mill test certificate have to show?
A: Alloy and temper, heat number, chemical analysis, mechanical test results and the product standard, issued at 3.1 level under EN 10204 for verification purposes.

Q: How is the customs value determined?
A: Normally from the transaction value under the WTO valuation agreement, adjusted as required by the declared terms of sale for freight and insurance.

Q: Why is a preferential origin certificate refused?
A: Usually because the origin criteria are not demonstrated, the certificate is issued after shipment, or the invoice details do not match the certificate exactly.

Q: Does packing material matter for clearance?
A: Yes. Solid wood packaging has to meet the destination phytosanitary requirements, so treated and marked pallets avoid an inspection hold at arrival.

Q: Can a classification be confirmed before shipment?
A: Yes. Applying for an advance ruling on the specific product form and processing state removes most classification risk before the goods move.