Comparative Analysis of 3A21 H24 and 3003 Anti-rust Aluminum Alloy

Mar 27, 2025

Leave a message

1. Alloy type and standard
‌3A21 H24‌:
The Al-Mn anti-rust aluminum alloy in the Chinese national standard (GB/T 3190), with a manganese (Mn) content of 1.0–1.6%. The strength is improved by cold hardening (H24 state), and cannot be strengthened by heat treatment.
‌3003‌:
The Al-Mn anti-rust aluminum in the Chinese national standard (GB/T 3190) or American standard (AA 3003), the composition is highly similar to 3A21, but the state selection is more flexible (such as H14, H24, O state), and the performance can be adjusted by cold hardening or annealing.

2. Chemical composition differences (mass percentage)
Manganese (Mn): 3A21: 1.0–1.6% 3003: 1.0–1.5% (close to 3A21)

Copper (Cu): 3A21: strictly limited to ≤0.20% 3003: allowed to be 0.05–0.20% (wider range)

Silicon (Si) and Iron (Fe): Both are controlled to Si≤0.6%, Fe≤0.7%

3. Typical application areas
‌3A21 H24‌:
Construction: rust-proof aluminum wall panels for chemical plants, corrugated aluminum roof panels (resistant to corrosive gases).
Transportation: ship liquid storage tanks, automobile fuel tank aluminum panels (high fatigue resistance requirements).
Industrial equipment: deep-drawn aluminum containers (such as chemical reagent tanks), low-load aluminum rivets.
‌3003‌:
Construction: aluminum curtain walls, ceiling aluminum panels (lightweight decoration requirements).
Transportation: rail transit interior aluminum panels, radiator aluminum shells (high formability required).
Industrial equipment: food packaging aluminum cans, chemical aluminum pipes (deep drawing requirements)

Comparative Analysis of 3A21 H24 and 3003 Anti-rust Aluminum AlloyComparative Analysis of 3A21 H24 and 3003 Anti-rust Aluminum Alloy