Can laser cutting process aluminum plates?

Apr 25, 2025

Leave a message

Aluminum plate processing is often encountered in the aluminium industry. One of the questions is whether aluminum plates can be cut by laser? The answer is yes, it can be cut by laser.
A few years ago, laser cutting machines could cut aluminum plates. Workers would apply ink on the aluminum plates (it is said that this is because the aluminum plates have a high reflectivity and are afraid of reflecting the laser). In addition, the parameters of the laser are difficult to adjust. At that time, only thin aluminum plates with a thickness of 1 mm could be cut. After accumulating experience, the cuts of aluminum plates are also very smooth.
Whether the laser cutting machine can cut aluminum plates depends on the power of the laser generator. The thickest one that can be cut with a 6000W laser generator is 16mm, and the one that can be cut with a 4500W laser generator is 12mm. However, the processing cost is high because clear anodized is a highly reflective material. Laser cutting uses a focused high-power density laser beam to irradiate the workpiece, causing the irradiated material to melt, vaporize, ablate or reach the ignition point quickly, and at the same time uses a high-speed airflow coaxial with the beam to blow away the molten material, thereby achieving cutting aluminum.
Is the cut surface of laser-cut aluminum plate as smooth as cutting other materials?
The cut of aluminum plate is also smooth, but a large laser generator is needed. The cutting gas is the same as other materials, which is nitrogen cutting, which will not cause the surface to be rough.

Features of laser cutting of aluminum plate:
1. Thin cutting seam: The cutting seam of laser-cut aluminum plate is generally 0.1mm-0.2mm
2. Smooth cutting surface: The cutting surface of laser-cut aluminum plate has no burrs or slag.
3. Small thermal deformation: The laser cutting seam of laser processing is thin, fast, and energy is concentrated, so the heat transferred to the cut material is small, and the deformation of the material is also very small.
4. Save materials: Laser processing uses computer programming, and laser equipment can cut aluminum plate processing parts of different shapes into materials, improve the material utilization rate of aluminum plate, and save a lot of material costs.
5. How thick the aluminum plate can be cut depends mainly on the power of the laser generator. Generally, the thickest 6000W can cut to 16mm, and 4500W can cut to 12mm.

laser cut aluminum plategnee national aluminium company