Product Description
Item: 7075 Aluminium sheet, 7075 Aluminium plate, 7075 Aluminium alloy sheet, 7075 Aluminium alloy plate, Pure aluminium sheet/plate
Standard: GB/T3190-2008, GB/T3880-2006, ASTM B209, JIS H4000-2006, etc
Thickness: 0.1-200mm, Width: 1-3200mm, Length: 2m, 2.44m, 3m, 6m, or as required
Surface: Mill, color coated, coated, sand blasting, embossed, polished, powder coating, brushing, oxidized,
Enameled wire, anodic oxidation, etc
Export to: Singapore, Indonesia, Ukraine, Korea, Thailand, Brazil, India, USA, Canada, Spain, etc
Our 7075 Aluminium sheet has best quality with low cost and short delivery, welcome to contact for more details.
| Item | Aluminium sheet, Aluminium plate, Aluminium alloy sheet, Aluminium alloy plate |
| Standard | GB/T3190-2008, GB/T3880-2006, ASTM B209, JIS H4000-2006, etc |
| Material | Si≤0.40,Fe≤0.50,Cu:1.2-2.0,Mn ≤0.30,Cr :0.18-0.28,Zn:5.1-6.1,Ti ≤0.20,Mg:2.1-2.9,Al:balance |
| Thickness | 0.1-200mm |
| Width | 1-3200mm |
| Length | 1-12m, or as required |
| Surface | mill,color coated,coated,sand blasting,embossed,polished,powder coating,brushing,oxidized, enameled wire,anodic oxidation,etc |
| Application | 1)Further making utensil. 2)Solar reflective film 3)The appearance of the building 4)Interior decorating: ceilings, walls, etc. 5)Furniture cabinets 6)Elevator decoraction 7)Signs, nameplate, bags making. 8)Decorated inside and outside the car 9)Household appliances: refrigerators, microwave ovens, audio equipment, etc. 10)The consumer electronics: mobile phones, digital cameras,MP3, U disk, etc. |
| Contact | If you have any question , please feel free to contact me . |
Product Description

Aluminum plate refers to aluminum materials with a thickness of 0.2mm to 500mm, a width of 200mm and a length of less than 16m. Aluminum materials below 0.2mm and within 200mm width are called rows or strips (of course, with the advancement of large equipment, there are more aluminum plates with a maximum width of 600mm).
Aluminum plate refers to a rectangular plate made by rolling aluminum ingots, which is divided into pure aluminum plate, alloy aluminum plate, thin aluminum plate, medium and thick aluminum plate, and patterned aluminum plate.
Aluminum plates are usually divided into the following two categories:
1. According to alloy composition:
High-purity aluminum plate (rolled from high-purity aluminum with a content of more than 99.9)
Pure aluminum plate (basically rolled from pure aluminum)
Alloy aluminum plate (composed of aluminum and auxiliary alloys, usually aluminum-copper, aluminum-manganese, aluminum-silicon, aluminum-magnesium, etc.)
Composite aluminum plate or brazing plate (special-purpose aluminum plate material obtained by combining multiple materials)
Aluminum-clad aluminum plate (aluminum plate covered with thin aluminum plate for special purposes)
2. According to thickness: (unit: mm)
Thin plate (aluminum sheet) 0.15-2.0
Conventional plate (aluminum sheet) 2.0-6.0
Medium plate (aluminum plate) 6.0-25.0
Thick plate (aluminum plate) 25-200 Extra thick plate 200 or more
Aluminum plate refers to the rectangular plate made of aluminum ingot rolling, which is divided into pure aluminum plate, alloy aluminum plate, thin aluminum plate, medium thick aluminum plate and pattern aluminum plate.
Aluminum plate is usually divided into the following two types:
1. According to the alloy composition:
High purity aluminum sheet (rolled from high purity aluminum with content above 99.9)
Pure aluminum plate (basically made of rolled pure aluminum)
Alloy aluminum plate (composed of aluminum and auxiliary alloys, usually aluminum copper, aluminum manganese, aluminum silicon, aluminum magnesium, etc.)
Composite aluminum plate or brazed plate (special purpose aluminum plate material obtained by means of composite of multiple materials)
Aluminum clad aluminum sheet (aluminum sheet coated with thin aluminum sheet for special purposes)
2. Divided by thickness :(unit mm)
aluminum sheet (aluminum sheet) 0.15-2.0
Conventional plate (aluminum sheet) 2.0-6.0
Medium plate (aluminum plate) 6.0-25.0
Thick plate (aluminum plate) 25-200 super thick plate more than 200


