Anodized Aluminum Sheet 7um Alloy Sheet 5083 5052
| 5000 SERIES | 5xxx series representatives 5052 5005 5083,5754. The 5000 series aluminum alloy aluminum belong to the more commonly used series, the main elements for magnesium, with magnesium in the amount between 3-5%. And can be called aluminum magnesium alloy. Key features for low density, high tensile strength, elongation rate is high. In the same area under the weight of the magnesium alloy aluminum less than other series. |
| 6000 SERIES | 6xxx series represents 6061 mainly contain magnesium and silicon of two elements, so focused on the 4000 series and the advantages of the 5000 series 6061 is a cold treatment aluminum forging products, apply to fight against corrosion, oxidizing demanding applications. |
| Type | Grade | Thickness | Width | Length |
| Pure Aluminum Plate | 1050/1060/1100 | 0.15-350mm | less 2200mm | less 12000mm |
| Antirust Aluminum Plate | 3003/3004 | 0.15-350mm | less 2200mm | less 12000mm |
| Aluminum Alloy Plate | 5052/5754/5A05/5A06 | 0.15-350mm | less 2200mm | less 12000mm |
| Aluminum Alloy Plate | 5083 | 0.15-500mm | less 2200mm | less 11000mm |
| Aluminum Alloy Plate | 6061/6063/6082/6A02 | 0.8-150mm | less 2200mm | less 11000mm |
The so-called anodic oxidation of aluminum is an electrolytic oxidation process. In this process, the surface of aluminum and aluminum alloy is usually transformed into a layer of oxide film, which has protective, decorative and some other functional characteristics. From this definition, the anodizing of aluminum only includes the process of forming anodic oxide film.
An oxide film is formed on the surface of metal or alloy parts by electrolysis. Metal oxide film changes the surface state and properties, such as surface coloring, improving corrosion resistance, enhancing wear resistance and hardness, protecting metal surface and so on. For example, aluminum anodizing, aluminum and its alloy are placed in the corresponding electrolyte (such as sulfuric acid, chromic acid, oxalic acid, etc.) as the anode for electrolysis under specific conditions and applied current. Anodized aluminum or its alloy forms a thin layer of alumina on the surface, with a thickness of 5 ~ 30 microns, and the hard anodized film can reach 25 ~ 150 microns. The anodized aluminum or its alloy improves its hardness and wear resistance, up to 250 ~ 500 kg / mm2, good heat resistance, the melting point of hard anodized film is up to 2320k, excellent insulation and breakdown voltage is up to 2000V, which enhances the corrosion resistance ω= 0.03 NaCl salt spray does not corrode after thousands of hours. The thin layer of oxide film has a large number of micropores, which can absorb various lubricants and is suitable for manufacturing engine cylinders or other wear-resistant parts; The membrane has strong microporous adsorption capacity and can be colored into various beautiful and gorgeous colors. Non ferrous metals or their alloys (such as aluminum, magnesium and their alloys) can be anodized. This method is widely used in mechanical parts, aircraft and automobile parts, precision instruments and radio equipment, daily necessities and architectural decoration.
Specification
| Length &Width | as customer requirements (slitting) |
| Thickness | 0.3-500mm(according to your requirement ) |
| Surfacetreatment | Anodized,Mill finished ,glaze,polished ,brushing,power coating |
| Temper | H14 H16 H18 H22 H24H26 H28 H111 H112 H12T1 T3 T4 T5 T6 |
| PaymentMethod | 30%T/T deposit, and balance 70% when customer gets B/LT/T:LC:irrevocable L/C at sight |
| Loading Port | Shanghai or other major port |
| Other aluminum sheet' product |
1000 series:1080 1070 1060 1050 1145 1235 1200 1100 2000 series.2A12 2014 2024 20172219 3000 series.3A21 3102 3003 3103 3004 3104 3005 3105 5000 seres:5005504050495449505052515052 5154 54545754 5082 5083 5086 6000 series:6061 6A02 6016 6063 6082 7000 series: 7050 7075 7475 |
| Application | Aircraft and aerospace components, marine fittings, transport, bicycle framescamera lenses,drve shafts electrical fittings and connectors, brakecomponents,valves,couplings. |
| Export | India, Pakistan, Canada, the USA, Thailand, Malaysia, Singapore, Dubai, Saudi Arabia, and Brazil. |
| Supply ability | 500 tons per week |