Anodized Aluminum Sheet 7um Alloy Sheet 5083 5052

Jan 22, 2026

Leave a message

Anodized Aluminum Sheet 7um Alloy Sheet 5083 5052

5000 SERIES 5xxx series representatives 5052 5005 5083,5754. The 5000 series aluminum alloy aluminum belong to the more
commonly used series, the main elements for
magnesium, with magnesium in the amount between 3-5%. And can be called aluminum magnesium alloy. Key features
for low density, high tensile strength,
elongation rate is high. In the same area under the weight of the magnesium alloy aluminum less than other series.
6000 SERIES 6xxx series represents 6061 mainly contain magnesium and silicon of two elements, so focused on the 4000 series
and the advantages of the 5000 series 6061
is a cold treatment aluminum forging products, apply to fight against corrosion, oxidizing demanding applications.
Type Grade Thickness Width Length
Pure Aluminum Plate 1050/1060/1100 0.15-350mm less 2200mm less 12000mm
Antirust Aluminum Plate 3003/3004 0.15-350mm less 2200mm less 12000mm
Aluminum Alloy Plate 5052/5754/5A05/5A06 0.15-350mm less 2200mm less 12000mm
Aluminum Alloy Plate 5083 0.15-500mm less 2200mm less 11000mm
Aluminum Alloy Plate 6061/6063/6082/6A02 0.8-150mm less 2200mm less 11000mm

 

Anodized Aluminum Sheet 7um Alloy Sheet 5083 5052Anodized Aluminum Sheet 7um Alloy Sheet 5083 5052

 

The so-called anodic oxidation of aluminum is an electrolytic oxidation process. In this process, the surface of aluminum and aluminum alloy is usually transformed into a layer of oxide film, which has protective, decorative and some other functional characteristics. From this definition, the anodizing of aluminum only includes the process of forming anodic oxide film.

An oxide film is formed on the surface of metal or alloy parts by electrolysis. Metal oxide film changes the surface state and properties, such as surface coloring, improving corrosion resistance, enhancing wear resistance and hardness, protecting metal surface and so on. For example, aluminum anodizing, aluminum and its alloy are placed in the corresponding electrolyte (such as sulfuric acid, chromic acid, oxalic acid, etc.) as the anode for electrolysis under specific conditions and applied current. Anodized aluminum or its alloy forms a thin layer of alumina on the surface, with a thickness of 5 ~ 30 microns, and the hard anodized film can reach 25 ~ 150 microns. The anodized aluminum or its alloy improves its hardness and wear resistance, up to 250 ~ 500 kg / mm2, good heat resistance, the melting point of hard anodized film is up to 2320k, excellent insulation and breakdown voltage is up to 2000V, which enhances the corrosion resistance ω= 0.03 NaCl salt spray does not corrode after thousands of hours. The thin layer of oxide film has a large number of micropores, which can absorb various lubricants and is suitable for manufacturing engine cylinders or other wear-resistant parts; The membrane has strong microporous adsorption capacity and can be colored into various beautiful and gorgeous colors. Non ferrous metals or their alloys (such as aluminum, magnesium and their alloys) can be anodized. This method is widely used in mechanical parts, aircraft and automobile parts, precision instruments and radio equipment, daily necessities and architectural decoration.

 

Product Name Aluminum Sheet & Plate
Alloy/Grade 1000, 2000, 3000, 5000, 6000, 7000, 8000 Series
Temper O-H112
Thickness 0.1mm-5mm
Width 3mm-3000mm
Length As per your requirements
Application Lighting,Solar reflective film,Architectural appearance,Interior decoration,Sublimation
Surface treatment Mill Finish,Coated,Powder Coated,Anodized,Polished mirror,Embossed,Etc.
Mirror colour clear,Golden,Bronze,Grey,Pink,Green,Blue etc
Elongation (%) 1-35%
Yield (MPa) 0~560Mpa
Ultimate Strength 70~550Mpa
Tolerances As per your requirements
Delivery time 7-30 days after order confirmation
MOQ 1 ton
Loading Port Qingdao Port,Tianjin Port,Shanghai port.
Coil ID As per your requirements
Price terms FOB, CIF, CFR, CNF, Etc.
Payment terms L/C,D/A,D/P,T/T , West Union, Money Gram, Etc.
Standards ASTM-B209,EN573-1,GB/T3880.1-2006
Certificate ISO, RoHS
Special Specification is available on customer ' s requirement


Our Aluminum Grade

1000 Series Industrial Pure Aluminum(1050,1060 ,1070, 1100)
3000 Series Aluminum-manganese alloys(3A21, 3003, 3103, 3004, 3005, 3105)
5000 Series Al-Mg alloys(5052, 5083, 5754, 5005, 5086,5182)
6000 Series Aluminum Magnesium Silicon Alloys(6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02)
7000 Series Aluminum, Zinc, Magnesium and Copper Alloys(7075, 7A04, 7A09, 7A52, 7A05)