Aluminum Sheet 6061 VS.5052 Aluminum Alloy

Jul 10, 2025

Leave a message

 What is 5052 aluminum alloy?

5052 aluminum alloy belongs to the 5000 series alloy. The main added element is magnesium, which is about 3-5%, so it is also called aluminum-magnesium alloy. The main characteristics of 5052 aluminum alloy are low density, high tensile strength, high elongation, and non-heat treatable.

5052 aluminum alloy does not contain copper, which means it is not as susceptible to salt water corrosion as other aluminum alloys. It belongs to stainless steel treated aluminum alloys and is also a perfect choice for the shipbuilding industry.

The density of 5052 aluminum alloy is 2.68g/cm3, which is slightly lower than pure aluminum, so it is very commonly used in the aerospace field, such as aircraft fuel tanks. 5052 aluminum alloy is also widely used in some traditional industries, such as 3C products, fuel tank materials, high-end curtain wall panels, shutters, pressure vessels, medical equipment, etc.

5052 Aluminum sheet

 What is 6061 aluminum alloy?

The main added elements of 6000 series aluminum alloy are magnesium and silicon, and the representative aluminum alloy is 6061. 6061 aluminum alloy has the characteristics of medium strength, good corrosion resistance, weldability, no deformation after processing, easy coloring, and good oxidation effect.

The standard of 6061 aluminum alloy is ASTM B209 or GB/T3880-2006, and it is widely used in various industrial structural parts that require certain strength and high corrosion resistance, such as mobile phone slots, mobile phone shells, manufacturing trucks, tower buildings, structural materials, ships, railway vehicles, precision machining, etc.

6061 Aluminum  sheet

 

 Key Differences Between 6061 vs. 5052 Aluminum

Although both aluminum alloys are lightweight, strong, corrosion resistant, and weldable (with some potential for thermal deformation), the two materials are not interchangeable.

 5052 vs 6061 aluminum chemical composition

Element Composition (%)
5052 Alloy 6061 Alloy
Si 0.25 0.4-0.8
Fe 0.4 0.7
Cu 0.1 0.15-0.4
Mn 0.1 0.15
Mg 2.2-2.8 0.8-1.2
Cr 0.15-0.35 0.04-0.35
Ni - -
Zn 0.1 0.25
Ti - 0.15
Others:Each 0.05 0.05
Others:Total 0.15 0.15
Aluminumin Remainder Remainder

 

 5052 vs 6061 aluminum specification

Alloy 5052 6061
Thickness(mm) 0.1-600 0.3-500
Width(mm) 20-2650 100-2800
Length(mm) 500-16000 500-16000

 

 5052 vs 6061 aluminum tempers

Alloy

5052 6061
Temper F, O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114 F, O, T4, T451, T42, T5, T6, T651, T6511, H112

 

 5052 vs 6061 aluminum shape

5052 aluminum alloy products include 5052 aluminum plates, aluminum sheets, 5052 embossed aluminum plates, 5052 aluminum tubes, 5052 aluminum bars, 5052 aluminum extruded profiles, etc.

6061 aluminum alloy products include 6061 aluminum plates, 6061 aluminum plates or extra-thick plates, 6061 aluminum bars, 6061 aluminum tubes, 6061 aluminum profiles, and 6061 angle aluminum.

 

 5052 vs 6061 aluminum mechanical properties

Material properties 5052 aluminum alloy 6061 aluminum alloy conclusion
Yield Strength 193 MPa 276 MPa 6061 aluminum is more difficult to permanent deformation than 5052 (276 MPa vs. 193 MPa), showing its increased strength and formability.
Modulus of Elasticity 70.3 GPA 68.9 GPA 5052 aluminum alloy has a larger elastic modulus and lower yield strength, so 5052 aluminum can be formed and processed without much risk of fracture, while the opposite is true for 6061 aluminum alloy.
Fatigue Strength 117 Mpa 96.5 Mpa The fatigue strength of 6061 aluminum alloy is lower than that of 5052 aluminum alloy, which means that 5052 aluminum sheet can withstand more deformation cycles. 5052 aluminum is more resilient against fatigue damage than 6061 aluminum alloy.
Thermal conductivity 138 W/m-K 167 W/m-K 6061 aluminum alloy has a higher thermal conductivity level than 5052 aluminum alloy, therefore, 6061 aluminum alloy is the material of choice for radiator and heat exchanger applications.
Machinability Poor Good 6061 aluminum alloy has good machinability compared to 5052 aluminum alloy because it is more brittle, tends to produce smaller chips and is easier to machine.

Weight

2.68 g/cm3 2.7 g/cm3 similar

 

 5052 vs 6061 aluminum alloy heat treatment

5052 is a non-heat-treatable aluminum alloy. This means that 5052 aluminum alloy can be strengthened by cold working or strain hardening. 5052 H112 aluminum plate and 5052 H32 aluminum plate are the most common hardening processes.
6061 aluminum alloy can be heat treated to increase its strength and durability. 6061 T4 aluminum alloy and 6061 T6 aluminum alloy are the most common tempers of 6061 and are often used in heavy-duty structures.

 

 5052 vs 6061 aluminum alloy corrosion resistance

5052 aluminum alloy does not contain any copper elements, so it has excellent stability under environmental conditions. It is not easy to corrode when used in salt water environments that weaken and corrode copper metal composites. Therefore, it is widely used in gas tankers and offshore structures. In terms of corrosion resistance, 5052 aluminum alloy is superior to 6061 aluminum alloy.
When these two alloys are exposed to alkaline soils, due to the high magnesium content of 5052 and 6061 aluminum alloys, they can resist corrosion caused by ammonia, ammonium hydroxide and nitric acid. To further avoid corrosion, 5052 color-coated aluminum sheets can be used, which can form a protective layer and are widely used in building curtain walls.

 

 5052 vs 6061 aluminum alloy application

Common applications for 6061-T6 include:

Automobile manufacturing:truck and bus bodies, wheels and various transport terminal uses, brakes and hydraulic pistons.

Aerospace:aircraft structural parts and fuselage parts.

Rail transit: railway vehicle parts, subway platforms, stairs, floors, covers, walkways.

Food industry: canned food, food and beverage cans.

Others: diving gas cylinders, pipe fittings, hinge pins, valves and valve parts, bicycle frames, fire ladders, bridge parts, camera lens brackets, couplings, electrical accessories and connectors, magneto parks, structural frames, basic equipment and gussets.

Common applications for 6061-T6

Application of 5052 aluminum alloy:

Marine applications:large marine structures, LNG tanks, marine equipment.

Architectural decoration:building facade.

Home appliances:electronic shell, kitchen cabinet, electrical appliance, fan and fan blade, household freezer, clock board, fence, etc.

Transportation:aircraft, bus and truck manufacturing, road and name signs, fuel lines and tanks, street lights and other signs in the transportation industry.

Industrial manufacturing:pressure vessels, sheet metal parts, heat exchangers, chemical equipment, aluminum pedals, etc.

Application of 5052 aluminum alloy

GNEE is a large-scale modern aluminum supplier integrating scientific research, processing and manufacturing.
GNEE can produce 1-8 series aluminum plates, strips and foils with complete specifications, large capacity, large inventory and good prices to meet your personalized processing needs.
The products produced by GNEE have passed CE. ISO9001 certification, and can be customized according to customer needs, such as JIS, EN, ASTM, etc.

You can contact us for details, or check our inventory information directly.

Contact now

GNEE TEAM