Aluminum tube is a kind of non-ferrous metal tube, which refers to a metal tubular material that is made of pure aluminum or aluminum alloy and is hollowed along its entire longitudinal length.There can be one or more closed through holes, with uniform wall thickness and cross-section, and are delivered in a straight line or in rolls. Widely used in automobiles, ships, aerospace, aviation, electrical appliances, agriculture, electromechanical, household and other industries.
|
Product Name |
Low price aluminum products 7075 6061 Anodized Aluminum Pipe / Aluminum Tube |
|
Diameter |
2.5-90mm or as required |
|
Thickness |
0.3-2mm or as required |
|
Temper |
H32 H34 H36 H111 H112 H116 |
|
Material |
1000, 2000, 3000, 4000, 5000, 6000 series |
|
Application |
Aluminum coils are suitable for various air conditioners, refrigerators, freezer refrigeration pipes, floor heating heating pipes, |
|
Shipment Time |
within 25 workdays after receiving deposit. |
|
Export packing |
Waterproof paper, and steel strip packed.Standard Export Seaworthy Package.Suit for all kinds of transport,or as required. |
FAQ
1.Q:Can you send me free samples?
A: YES. Sample is free, just freight fee
2.Q:Delivery time?
A: 15-30 days after receiving the advanced payment. If making the mould , there will be 10-15 days to finish and test.
3. Q:How soon can you produce and deliver my Aluminum Profiles?
A: According to your demand and depending on the quantity and complexity.
4. Q:How is the service?
A:Our company owns extruding production lines, surface treatment production line. And we have professional
engineers that help you analyse the design. Regarding the window and door, ladder,we have our own systems
for your reference.
5. Q:How can you guarantee the quality?
A:Before mass production, we will test the mould till its quality pass. In the production, your order will be followed
by QC during every step. Every product must be checked and signed before they move to the next process.
Export Control Notice - These Grades Cannot Be Exported
7075 aluminum falls within these categories and is not available for export.
High-strength aluminum alloys of this class are listed under the export control regulations of the People's Republic of China for dual-use items and technologies. Shipping them out of China requires an export licence issued by the competent Chinese authorities. In practice a licence is not obtained for ordinary commercial orders in these categories, so GNEE does not export them.
GNEE does not export to any party or destination prohibited under applicable export control and international sanctions laws.
Control status technically turns on six variables: alloy grade, temper, product form, dimensions, quantity and intended end-use. Whatever the combination, none of the grades in the table below are available for export from GNEE.
Aluminum grades affected by these controls
| Alloy grade | Common temper(s) | Tensile strength (MPa) - reference |
|---|---|---|
| 7075 | T6 / T651 | 540 – 570 |
| 7075 | T73 / T7351 | 485 – 500 |
| 7075 | T76 / T7651 | 500 – 515 |
| 7050 | T7451 / T6 | 475 – 620 |
| 2024 | T351 / T4 | 425 – 470 |
| 7A04 | T6 | ≥ 530 |
| 2014 | T6 | approx. 460 – 500 |
| 2017 | T4 | approx. 390 – 480 (some specifications may reach higher) |
| 2195 | - | approx. 572 |
| 7068 | - | approx. 623 |
| 7055 | - | approx. 654 |
| 7150 | - | approx. 643 |
Strength values in this table are indicative reference ranges used for control classification. They are not specification minimums. The governing limits for any enquiry come from the applicable standard or your drawing.
What we can quote instead
We cannot accept export enquiries for the grades listed above. If strength is the reason you are looking at them, send us the load case, the service environment and the fabrication method, and we will quote a non-controlled substitute - usually from the 5xxx or 6xxx series - with properties that fit the job and no export restriction attached.