1. What are the primary types of aluminum alloys and their applications?
1xxx Series (Pure Aluminum):
Used for electrical conductors (≥62% IACS conductivity) and food packaging due to 99%+ purity and corrosion resistance25.
3xxx Series (Al-Mn Alloys):
Ideal for beverage cans (e.g., 3004 alloy) with 180-240 MPa tensile strength and deep-drawing capability38.
5xxx Series (Al-Mg Alloys):
Marine applications (e.g., 5083 alloy) offer seawater corrosion resistance and 270-350 MPa yield strength47.
6xxx Series (Al-Mg-Si Alloys):
Structural components (e.g., 6061-T6) achieve 310 MPa tensile strength for aerospace and automotive extrusions59.
7xxx Series (Al-Zn Alloys):
High-strength aircraft parts (e.g., 7075-T651) with 570 MPa tensile strength and fatigue resistance610.
2. How does aluminum extrusion technology work?
Billet Heating: Preheated to 450-500°C (homogenized) for optimal plasticity37.
Die Design: Custom-shaped dies (tungsten steel) withstand 10,000+ tons of pressure5.
Ram Force: Hydraulic presses apply 15-100 MN force at speeds of 5-50 mm/s8.
Quenching: Post-extrusion water/air cooling achieves T5/T6 tempers (enhanced hardness)4.
Stretching: 0.5-3% elongation corrects distortion (per AMS 2772 standards)9.
3. What surface treatments improve aluminum's performance?
Anodizing:
Creates 5-25 μm oxide layer (Type II/III) with 500-800 Vickers hardness for wear resistance26.
Powder Coating:
Electrostatic application of 60-120 μm polymer layers (e.g., polyester) for UV protection58.
Chemical Conversion Coating:
Chromate-free treatments (e.g., TCP) provide 168+ hours salt spray resistance (ASTM B117)7.
Laser Engraving:
Fiber lasers mark QR codes/logos at 20-100 kHz without material removal3.
Electroplating:
Nickel (5-10 μm) or zinc coatings enhance conductivity and solderability410.
4. What industries dominate aluminum consumption?
Transportation:
Automotive bodies (e.g., Tesla Cybertruck) use 500+ kg aluminum to cut weight by 40% vs. steel59.
Construction:
Curtain walls (e.g., 6063-T5 alloy) reduce building energy consumption by 20-30%37.
Packaging:
Beverage cans (75% recycled content) save 95% energy vs. virgin material production68.
Electronics:
Heat sinks (1070 alloy) achieve 200-220 W/m·K thermal conductivity for 5G devices210.
Renewable Energy:
Solar panel frames (6005-T5) endure 25+ years of outdoor exposure with <0.1 mm/year corrosion rate49.
5. How is aluminum recycled sustainably?
Collection & Sorting:
Eddy current separators achieve 98% purity by removing non-metallic contaminants68.
Shredding:
Rotary shears process scrap into 50-100 mm fragments for efficient melting3.
Decoating:
Thermal (500-600°C) or chemical (NaOH) methods remove coatings/paints5.
Melting:
Reverberatory furnaces melt scrap at 750°C, consuming 5% energy vs. primary production



