Looking for a lightweight, corrosion-resistant aluminum material with excellent formability?
Aluminium 1050 H14 aluminum coil, sheet, and plate supplied by GNEE are widely used in general sheet metal work, chemical equipment, and architectural applications where moderate strength and high purity are required.
Overview of 1050 H14 Aluminum Coil, Sheet and Plate
Aluminium alloy 1050 belongs to the 1xxx series pure aluminum alloys, containing a minimum of 99.5% aluminum. The H14 temper indicates that the material has been work-hardened by rolling to half-hard condition, without subsequent annealing.
Thanks to its high aluminum content, 1050 H14 aluminum plate and coil offer the following core advantages:
Lightweight structure
Excellent electrical and thermal conductivity
High corrosion resistance
Outstanding ductility and formability
Bright, highly reflective surface finish
When exposed to air, aluminum naturally forms a dense oxide layer, providing inherent protection against corrosion. This makes 1050 H14 aluminum sheet suitable for both indoor and outdoor environments.
Key Advantages of 1050 H14 Aluminum Plate
Aluminum alloy is naturally soft, but small additions of elements such as copper, magnesium, silicon, manganese, and zinc help improve performance while maintaining excellent workability.
1050 H14 aluminum coil and sheet are among the lightest metallic materials available, making them ideal for applications ranging from precision industrial components to everyday consumer products.
Typical Applications of 1050 H14 Aluminum Coil and Plate
Aluminium 1050 H14 aluminum sheet and plate are commonly used in applications requiring moderate strength and excellent corrosion resistance:
Chemical process plant equipment
Food industry containers
Pyrotechnic powder applications
Architectural flashings
Lamp and lighting reflectors
Cable sheathing
Chemical Composition of 1050 H14 Aluminum Plate
| Element | % Present |
|---|---|
| Copper (Cu) | 0 – 0.05 |
| Magnesium (Mg) | 0 – 0.05 |
| Silicon (Si) | 0 – 0.25 |
| Iron (Fe) | 0 – 0.40 |
| Manganese (Mn) | 0 – 0.05 |
| Zinc (Zn) | 0 – 0.07 |
| Titanium (Ti) | 0 – 0.05 |
| Aluminum (Al) | Balance (≥99.5%) |
Mechanical Properties of 1050 H14 Aluminum Sheet
(BS EN 485-2:2008, Thickness 0.2–6.0 mm)
| Property | Value |
|---|---|
| Proof Stress | ≥ 85 MPa |
| Tensile Strength | 105 – 145 MPa |
| Brinell Hardness | 34 HB |
| Elongation (A) | ≥ 12% |
The above mechanical properties apply to material in the H14 condition.
Physical Properties of 1050 H14 Aluminum Plate
| Property | Value |
|---|---|
| Density | 2.71 kg/m³ |
| Melting Point | 650 °C |
| Modulus of Elasticity | 71 GPa |
| Electrical Resistivity | 0.0282 × 10⁻⁶ Ω·m |
| Thermal Conductivity | 222 W/m·K |
| Thermal Expansion | 24 × 10⁻⁶ /K |
Alloy Designations for 1050 Aluminum Plate
Aluminium alloy 1050 is also known by the following international designations:
AA1050A
S1B
A91050
Fabrication Performance of 1050 H14 Aluminum Sheet
| Process | Rating |
|---|---|
| Cold Workability | Excellent |
| Machinability | Poor |
| Gas Welding | Excellent |
| Arc Welding | Excellent |
| Resistance Welding | Excellent |
| Brazability | Excellent |
| Solderability | Excellent |
Temper Information for 1050 H14 Aluminum Plate
The most common temper for 1050 aluminum plate and coil is:
H14 – Work-hardened by rolling to half-hard condition, not annealed after rolling.
This temper provides a balance between strength and formability, making it suitable for a wide range of industrial and architectural uses.
Supplied Forms of 1050 H14 Aluminum Coil and Sheet
GNEE supplies aluminium alloy 1050-H14 in the following forms:
Plain aluminum sheet
Plain sheet with single-side PVC coating
Stucco aluminum sheet
Stucco sheet with single-side PVC coating
Shate
All supplied products meet AS/NZS 1734:1997 and are equivalent to BS EN 573-1 standards for flat sheet, coiled sheet, and plate.
Why Choose GNEE for 1050 H14 Aluminum Plate?
As a professional aluminum supplier, GNEE provides stable-quality 1050 H14 aluminum coil, sheet, and plate with consistent chemical composition, reliable mechanical performance, and flexible surface options. Our products are widely used across chemical, architectural, electrical, and consumer industries.
Contact GNEE for 1050 H14 Aluminum Coil and Plate
If you need pricing, samples, technical data, or custom specifications for 1050 H14 aluminum sheet or coil, please contact GNEE today.
Our team is ready to support your project with reliable aluminum solutions and fast global delivery.
