Technology optimisation can be done in the following ways.
(1) Optimise the heat treatment process, such as using high-temperature short-time or low-temperature long-time annealing process, to improve the mechanical properties of the material. In addition, the metamorphic treatment can make the grain more uniform, refined, so that it obtains more excellent performance.
(2) Optimise the plate shape by controlling the shape of the rolls, and with the use of curved roll technology, adjust the amount of underpressure, tension and other parameters to obtain a good plate shape.
Aluminum Alloy 8011 Foil Chemical Properties
|
Al |
Reminder |
|
Si |
0.50 - 0.90 |
|
Fe |
0.60 - 1 |
|
Cu |
≤ 0.10 |
|
Mn |
≤ 0.20 |
|
Mg |
≤ 0.050 |
|
Cr |
≤ 0.050 |
|
Zn |
≤ 0.10 |
|
Ti |
≤ 0.080 |
(3) Optimise the composite rolling technology, rolling composite using a small pressure from one direction to drive the gas between the composite surface, and the composite surface between the oil, impurities clean up to reduce the generation of gas bubbles.
Not only that, but also need to develop from the material itself, high-end products such as 8011 aluminium foil laminated composite materials is the hot spot of future research and direction, can be applied to electrodes, high-end packaging and construction field.
