7075-T651 Precision Aluminum Tube Features

Jan 22, 2025

Leave a message

7075-T651 precision aluminum tube is a kind of high hardness, high strength, corrosion resistance, high temperature resistance, good formability and toughness and ductility of aluminum alloy. Its characteristics are as follows.

Excellent wear resistance, 7075-T651 precision aluminum tube surface is very strong, so it is very good wear performance, in many applications play a key role. The hardness of this alloy is about two times that of copper and silver.
2. Excellent corrosion resistance, 7075-T 651, 7075-T 653 and other series of aluminum alloys are chemically very stable, can resist various forms of acid, alkaline solutions and organic erosion, but also resist the corrosion of water vapor, in a harsh environment can still maintain excellent performance.

3. Stable mechanical properties - 7075 - T 653 and other series Aluminum alloys have a very high yield strength and tensile strength, and as the temperature rises and improves; also has a certain elongation, bending modulus of elasticity, and fatigue strength, which ensures that they are in a variety of conditions can be excellent performance.

Cold Drawn Aluminum TubingSmall Diameter Aluminum TubeLarge Diameter Aluminum Tube

4. Easy to manufacture - 7074 - T 583 and other series Aluminum alloys have good plasticity, toughness, weldability and machinability, these characteristics make them can be used in a variety of different fields. For example, it can be made into thin plates for stretch molding or extrusion molding of various complex structures, can also be used to make forgings, die castings or extruded profiles.

5. Lightweight design - 7076 - T 650, 6061 and other series of aluminum alloys are much lighter than ordinary steel, so it can save a lot of raw material costs.

6. Good casting properties - 7076 - T650, 6063, 6063, 6082, 6005, 6082, 6106, 6101 etc. Aluminum alloys have very good casting properties, i.e., small shrinkage factor, fast solidification speed and good fluidity. Due to the high shrinkage rate, these alloys are usually produced by low-pressure casting.