Choosing the correct temper for a 6061 aluminum plate is a critical decision that directly impacts manufacturing costs, performance, and the final part's durability. As a purchasing manager or engineer, selecting the wrong temper can lead to cracking during forming, difficulties in machining, or a component that fails to meet strength requirements.
At GNEE, we specialize in supplying high-quality 6061 aluminum plate. This guide is designed to provide clear, direct answers, helping you understand the key differences between the most common tempers-O, T4, T6, and T651-and select the most cost-effective option for your application.
What are the Fundamental Properties of 6061 Aluminum Plate?
6061 aluminum is a precipitation-hardened alloy, with magnesium and silicon as its primary alloying elements. This composition gives it a strong, versatile profile. All tempers of 6061 aluminum plate share these core properties:
- Excellent Corrosion Resistance
- Good Weldability
- Good Machinability
- High Strength-to-Weight Ratio
The "temper" designation refers to the heat treatment process applied to the plate, which modifies its mechanical properties to suit different needs.
| General Property (Applies to all tempers) | Value |
| Density | 2.70 g/cm³ (0.0975 lb/in³) |
| Modulus of Elasticity | 68.9 GPa (10,000 ksi) |
| Poisson's Ratio | 0.33 |

When Should You Use 6061-O Aluminum Plate?
6061-O aluminum plate is in its softest, most ductile state. The 'O' signifies that it has been fully annealed. This process removes internal stresses and maximizes its formability.
Choose 6061-O plate if your primary requirement is forming:
- Maximum Ductility: It is the best choice for parts requiring significant bending, deep drawing, or complex shaping without the risk of cracking.
- Lowest Strength: It has the lowest tensile and yield strength of all tempers.
- Post-Forming Treatment: Parts made from 6061-O can be subsequently heat-treated to a T4 or T6 temper to increase their strength after the forming process is complete.
- Plate-Specific Applications: Ideal for producing complex stamped parts or panels that are then heat-treated for final use.
When Should You Use 6061-T4 Aluminum Plate?
6061-T4 aluminum plate offers a good balance of formability and strength. It is solution heat-treated and then allowed to age naturally. It is stronger than O-temper but more formable than T6.
Choose 6061-T4 plate for a moderate blend of properties:
- Good Formability: Can handle moderate bending and forming operations where O-temper is not necessary but T6 would crack.
- Intermediate Strength: Stronger than O-temper, making it suitable for some structural uses where welding may be involved.
- Plate-Specific Applications: Welded assemblies, structural components with moderate forming, and parts that will not undergo further heat treatment.
What Makes 6061-T6 Aluminum Plate the Most Popular Choice?
6061-T6 is the workhorse of the 6061 family, offering the highest strength. It is solution heat-treated and then artificially aged. This temper provides an excellent strength-to-weight ratio.
Choose 6061-T6 plate for strength-critical applications:
- High Strength & Hardness: It has high tensile and yield strength, making it ideal for structural and high-stress components.
- Excellent Machinability: Its hardness results in good chip formation during CNC machining.
- Limited Formability: Due to its high strength, it is not suitable for tight bends or significant forming, which can cause cracking.
- Plate-Specific Applications: CNC machined parts, structural base plates, jigs, fixtures, and transportation components.

Why Choose 6061-T651 Aluminum Plate for Precision Machining?
6061-T651 aluminum plate offers the same high strength as T6, with the added benefit of being stress-relieved. The "T651" designation means it has been stretched to relieve internal stresses locked in during the quenching process.
Choose 6061-T651 plate for high-precision or heavily machined parts:
- Dimensional Stability: The removal of internal stress means the plate is far less likely to warp, bow, or twist after extensive machining.
- Tighter Tolerances: Allows for the creation of more accurate and dimensionally stable parts.
- Reduced Scrap Rate: Minimizes part rejection due to distortion, making it more cost-effective for complex CNC jobs.
- Plate-Specific Applications: Aerospace components, mold manufacturing, high-precision tooling plates, and any part where flatness and stability after machining are critical.
How to Choose the Right 6061 Plate Temper: A Direct Comparison
For a purchasing decision, a direct comparison is essential. At GNEE, we use this data to guide our clients.
| Mechanical Property | 6061-O | 6061-T4 | 6061-T6 / T651 |
| Primary Feature | Max Formability | Balanced | Max Strength |
| Ultimate Tensile Strength | ~124 MPa (18 ksi) | ~241 MPa (35 ksi) | ~310 MPa (45 ksi) |
| Yield Strength | ~55 MPa (8 ksi) | ~145 MPa (21 ksi) | ~276 MPa (40 ksi) |
| Elongation at Break (%) | ~25% | ~18% | ~12% |
| Brinell Hardness | ~30 HB | ~65 HB | ~95 HB |
| Formability | Excellent | Good | Poor |
| Machinability | Fair | Good | Excellent |
Conclusion: Get the Right 6061 Aluminum Plate from a Trusted Supplier
Selecting the correct temper for your 6061 aluminum plate is not just a technical detail-it's a crucial factor for project success and cost control.
- For forming, choose 6061-O.
- For high strength, choose 6061-T6.
- For precision machining, choose 6061-T651.
Unsure which temper is the most cost-effective for your specific part? Don't risk ordering the wrong material.
Send your drawings or project requirements to the engineering team at GNEE today. We will provide a competitive quote to ensure your project succeeds.

